The awe_wave driver in 2.2 looked at the common I/O ports for
the card if no parameters were specified. The 2.4 driver currently
does an ISAPnP probe, but doesn't fall back to the previous probing
behavior, which means that users with working module configurations
will have theirs broken on upgrade.
The attached fixes it to fall back to 2.2-style behavior if no
parameters are specified; if 'isapnp=1' is specified, it does
not try to look for cards if the ISAPnP probe fails.
Bill
This archive was generated by hypermail 2b29 : Fri Feb 23 2001 - 21:00:20 EST