[PATCH v2 2/9] mtd: fsl-quadspi: Rename SEQID_QUAD_READ to SEQID_READ

From: Yunhui Cui
Date: Fri Apr 22 2016 - 02:49:37 EST


There are some read modes for flash, such as NORMAL, FAST,
QUAD, DDR QUAD. These modes will use the identical lut table base
So rename SEQID_QUAD_READ to SEQID_READ.

Signed-off-by: Yunhui Cui <B56489@xxxxxxxxxxxxx>
Signed-off-by: Yunhui Cui <yunhui.cui@xxxxxxx>
---
drivers/mtd/spi-nor/fsl-quadspi.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/mtd/spi-nor/fsl-quadspi.c b/drivers/mtd/spi-nor/fsl-quadspi.c
index 517ffe2..9861290 100644
--- a/drivers/mtd/spi-nor/fsl-quadspi.c
+++ b/drivers/mtd/spi-nor/fsl-quadspi.c
@@ -193,7 +193,7 @@
#define QUADSPI_LUT_NUM 64

/* SEQID -- we can have 16 seqids at most. */
-#define SEQID_QUAD_READ 0
+#define SEQID_READ 0
#define SEQID_WREN 1
#define SEQID_WRDI 2
#define SEQID_RDSR 3
@@ -386,8 +386,8 @@ static void fsl_qspi_init_lut(struct fsl_qspi *q)
for (i = 0; i < QUADSPI_LUT_NUM; i++)
qspi_writel(q, 0, base + QUADSPI_LUT_BASE + i * 4);

- /* Quad Read */
- lut_base = SEQID_QUAD_READ * 4;
+ /* Read */
+ lut_base = SEQID_READ * 4;

qspi_writel(q, LUT0(CMD, PAD1, read_op) | LUT1(ADDR, PAD1, addrlen),
base + QUADSPI_LUT(lut_base));
@@ -468,7 +468,7 @@ static int fsl_qspi_get_seqid(struct fsl_qspi *q, u8 cmd)
{
switch (cmd) {
case SPINOR_OP_READ_1_1_4:
- return SEQID_QUAD_READ;
+ return SEQID_READ;
case SPINOR_OP_WREN:
return SEQID_WREN;
case SPINOR_OP_WRDI:
--
2.1.0.27.g96db324