[PATCH v2 6/9] mtd: spi-nor: Support R/W for S25FS-S family flash

From: Yunhui Cui
Date: Fri Apr 22 2016 - 02:49:40 EST


From: Yunhui Cui <yunhui.cui@xxxxxxx>

With the physical sectors combination, S25FS-S family flash
requires some special operations for read/write functions.

Signed-off-by: Yunhui Cui <yunhui.cui@xxxxxxx>
---
drivers/mtd/spi-nor/spi-nor.c | 59 +++++++++++++++++++++++++++++++++++++++++++
1 file changed, 59 insertions(+)

diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
index 157841d..91ee920 100644
--- a/drivers/mtd/spi-nor/spi-nor.c
+++ b/drivers/mtd/spi-nor/spi-nor.c
@@ -39,6 +39,10 @@

#define SPI_NOR_MAX_ID_LEN 6
#define SPI_NOR_MAX_ADDR_WIDTH 4
+/* Added for S25FS-S family flash */
+#define SPINOR_CONFIG_REG3_OFFSET 0x800004
+#define CR3V_4KB_ERASE_UNABLE 0x8
+#define SPINOR_S25FS_FAMILY_ID 0x81

struct flash_info {
char *name;
@@ -78,6 +82,7 @@ struct flash_info {
};

#define JEDEC_MFR(info) ((info)->id[0])
+#define EXT_ID(info) ((info)->id[5])

static const struct flash_info *spi_nor_match_id(const char *name);

@@ -881,6 +886,7 @@ static const struct flash_info spi_nor_ids[] = {
*/
{ "s25sl032p", INFO(0x010215, 0x4d00, 64 * 1024, 64, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
{ "s25sl064p", INFO(0x010216, 0x4d00, 64 * 1024, 128, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+ { "s25fs256s1", INFO6(0x010219, 0x4d0181, 64 * 1024, 512, 0)},
{ "s25fl256s0", INFO(0x010219, 0x4d00, 256 * 1024, 128, 0) },
{ "s25fl256s1", INFO(0x010219, 0x4d01, 64 * 1024, 512, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
{ "s25fl512s", INFO(0x010220, 0x4d00, 256 * 1024, 256, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
@@ -1018,6 +1024,53 @@ static const struct flash_info *spi_nor_read_id(struct spi_nor *nor)
return ERR_PTR(-ENODEV);
}

+/*
+ * The S25FS-S family physical sectors may be configured as a
+ * hybrid combination of eight 4-kB parameter sectors
+ * at the top or bottom of the address space with all
+ * but one of the remaining sectors being uniform size.
+ * The Parameter Sector Erase commands (20h or 21h) must
+ * be used to erase the 4-kB parameter sectors individually.
+ * The Sector (uniform sector) Erase commands (D8h or DCh)
+ * must be used to erase any of the remaining
+ * sectors, including the portion of highest or lowest address
+ * sector that is not overlaid by the parameter sectors.
+ * The uniform sector erase command has no effect on parameter sectors.
+ */
+static int spansion_s25fs_disable_4kb_erase(struct spi_nor *nor)
+{
+ struct fsl_qspi *q;
+ u32 cr3v_addr = SPINOR_CONFIG_REG3_OFFSET;
+ u8 cr3v = 0x0;
+ int ret = 0x0;
+
+ q = nor->priv;
+
+ nor->cmd_buf[2] = cr3v_addr >> 16;
+ nor->cmd_buf[1] = cr3v_addr >> 8;
+ nor->cmd_buf[0] = cr3v_addr >> 0;
+
+ ret = nor->read_reg(nor, SPINOR_OP_SPANSION_RDAR, &cr3v, 1);
+ if (ret)
+ return ret;
+ if (cr3v & CR3V_4KB_ERASE_UNABLE)
+ return 0;
+ ret = nor->write_reg(nor, SPINOR_OP_WREN, NULL, 0);
+ if (ret)
+ return ret;
+ cr3v = CR3V_4KB_ERASE_UNABLE;
+ nor->program_opcode = SPINOR_OP_SPANSION_WRAR;
+ nor->write(nor, cr3v_addr, 1, NULL, &cr3v);
+
+ ret = nor->read_reg(nor, SPINOR_OP_SPANSION_RDAR, &cr3v, 1);
+ if (ret)
+ return ret;
+ if (!(cr3v & CR3V_4KB_ERASE_UNABLE))
+ return -EPERM;
+
+ return 0;
+}
+
static int spi_nor_read(struct mtd_info *mtd, loff_t from, size_t len,
size_t *retlen, u_char *buf)
{
@@ -1311,6 +1364,12 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode)
spi_nor_wait_till_ready(nor);
}

+ if (EXT_ID(info) == SPINOR_S25FS_FAMILY_ID) {
+ ret = spansion_s25fs_disable_4kb_erase(nor);
+ if (ret)
+ return ret;
+ }
+
if (!mtd->name)
mtd->name = dev_name(dev);
mtd->priv = nor;
--
2.1.0.27.g96db324