[PATCH v2 3/9] mtd: spi-nor: fsl-quadspi: add fast-read mode support

From: Yunhui Cui
Date: Fri Apr 22 2016 - 02:49:26 EST


From: Yunhui Cui <yunhui.cui@xxxxxxx>

The qspi driver add generic fast-read mode for different
flash venders. There are some different board flash work on
different mode, such fast-read, quad-mode.

Signed-off-by: Yunhui Cui <yunhui.cui@xxxxxxx>
---
drivers/mtd/spi-nor/fsl-quadspi.c | 21 ++++++++++++++++-----
1 file changed, 16 insertions(+), 5 deletions(-)

diff --git a/drivers/mtd/spi-nor/fsl-quadspi.c b/drivers/mtd/spi-nor/fsl-quadspi.c
index 9861290..09adaa4 100644
--- a/drivers/mtd/spi-nor/fsl-quadspi.c
+++ b/drivers/mtd/spi-nor/fsl-quadspi.c
@@ -389,11 +389,21 @@ static void fsl_qspi_init_lut(struct fsl_qspi *q)
/* Read */
lut_base = SEQID_READ * 4;

- qspi_writel(q, LUT0(CMD, PAD1, read_op) | LUT1(ADDR, PAD1, addrlen),
- base + QUADSPI_LUT(lut_base));
- qspi_writel(q, LUT0(DUMMY, PAD1, read_dm) |
- LUT1(FSL_READ, PAD4, rxfifo),
- base + QUADSPI_LUT(lut_base + 1));
+ if (nor->flash_read == SPI_NOR_FAST) {
+ qspi_writel(q, LUT0(CMD, PAD1, read_op) |
+ LUT1(ADDR, PAD1, addrlen),
+ base + QUADSPI_LUT(lut_base));
+ qspi_writel(q, LUT0(DUMMY, PAD1, read_dm) |
+ LUT1(FSL_READ, PAD1, rxfifo),
+ base + QUADSPI_LUT(lut_base + 1));
+ } else if (nor->flash_read == SPI_NOR_QUAD) {
+ qspi_writel(q, LUT0(CMD, PAD1, read_op) |
+ LUT1(ADDR, PAD1, addrlen),
+ base + QUADSPI_LUT(lut_base));
+ qspi_writel(q, LUT0(DUMMY, PAD1, read_dm) |
+ LUT1(FSL_READ, PAD4, rxfifo),
+ base + QUADSPI_LUT(lut_base + 1));
+ }

/* Write enable */
lut_base = SEQID_WREN * 4;
@@ -468,6 +478,7 @@ static int fsl_qspi_get_seqid(struct fsl_qspi *q, u8 cmd)
{
switch (cmd) {
case SPINOR_OP_READ_1_1_4:
+ case SPINOR_OP_READ_FAST:
return SEQID_READ;
case SPINOR_OP_WREN:
return SEQID_WREN;
--
2.1.0.27.g96db324