Re: [PATCH] usb: musb: am335x: Do not remove the session binHOST-only mode

[Bin Liu]

Sebastian,

On Wed, Aug 14, 2013 at 1:17 PM, Sebastian Andrzej Siewior
<bigeasy@xxxxxxxxxxxxx> wrote:
> So I tried to boot my beagle bone board to figure out if they use the
> first or the second port in host mode (but it doesn't boot). The tiny
> micro USB plug is 100% for UART and not wired up to MUSB.

I have not run the mainline kernel on beagle bone yet, so I cannot
comment how it works, and it does not surprise if something is broken
since this is what you are trying to fix ;)

But I just booted my beagle bone with the out-of-box SD card which has
Angstrom 3.2.34 kernel. The USB0 port is in device mode with
g_mass_storage.ko loaded, and USB1 is in host-only mode.

> Any comments on that patch? I would remove the ID pin changes and
> repost if you don't mind.

That is okay to me, as long as both USB ports on the GP evm work.

-Bin.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/