Re: [PATCH 3/3] input: STMPE811 touch controller support

From: Luotao Fu
Date: Fri Jun 11 2010 - 07:45:38 EST


Hi,

On Fri, Jun 11, 2010 at 12:21:02PM +0100, Mark Brown wrote:
> On Fri, Jun 11, 2010 at 12:13:15PM +0200, Luotao Fu wrote:
>
> > +/*
> > + * reference source:
> > + *
> > + * Set ref_sel = 0 for internal reference
> > + * ref_sel = 1 for external reference
> > + */
> > +static int ref_sel;
> > +module_param(ref_sel, int, 0444);
> > +MODULE_PARM_DESC(ref_sel,
> > + "Set ADC reference source. Default is 0 (internal reference)");
>
> This looks like something that ought to be configured via platform data
> since the value that should be used is going to be determined by the
> board schematic. Similar comments apply to most of the other module
> parameters, though in some cases sysfs files might be more appropriate
> as well, or in addition.

OK. These stuffs are indeed platform dependent. I'll create a platform
data for it than.

Thanks
Luotao Fu
--
Pengutronix e.K. | Dipl.-Ing. Luotao Fu |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |

Attachment: signature.asc
Description: Digital signature