Re: Fwd: PROBLEM: ide messages during boot caused by a strange partition table

[marco gaddoni]

On 7/31/06, Alan Cox <alan@xxxxxxxxxxxxxxxxxxx> wrote:
> Ar Llu, 2006-07-31 am 08:16 +0200, ysgrifennodd marco gaddoni:
> > hda: task_in_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
> > hda: task_in_intr: error=0x10 { SectorIdNotFound },
> > LBAsect=1052835654, high=62, low=12648262, sector=1052835654
>
> The sector number appears valid for the drive (assuming the drive
> 9733 255 63 geometry is correct), so that looks like a bad block on the
> disk and nothing to do with partition tables.
thank you for your reply.
maybe this is a concidence, but i saw the problem the first
boot of linux after the (attempted) dos installation.

the disk is this

/dev/hda:

Model=SAMSUNG SP0802N, FwRev=TK100-23, SerialNo=0709J1FW500608
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs }
RawCHS=16383/16/63, TrkSize=34902, SectSize=554, ECCbytes=4
BuffType=DualPortCache, BuffSize=2048kB, MaxMultSect=16, MultSect=off
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=156368016
IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes:  pio0 pio1 pio2 pio3 pio4
DMA modes:  mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2
AdvancedPM=no WriteCache=enabled
Drive conforms to: ATA/ATAPI-7 T13 1532D revision 0:  ATA/ATAPI-1
ATA/ATAPI-2 ATA/ATAPI-3 ATA/ATAPI-4 ATA/ATAPI-5 ATA/ATAPI-6
ATA/ATAPI-7

* signifies the current active mode

is it correct that the max lba sect is LBAsects=156368016 and the kernel
is asking for 1052835654, 10 times more ?
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/