On Sunday 27 October 2002 19:16, Martin J. Bligh wrote:
> > OK, I went to your latest patches (just 1 and 2). And they worked!
> > You've fixed the performance degradation problems for kernel compile
> > (now a 14% improvement in systime), that core set works without
> > further futzing about or crashing, with or without TSC, on either
> > version of gcc ... congrats!
>
> So I have a slight correction to make to the above ;-) Your patches
> do work just fine, no crashes any more. HOWEVER ... turns out I only
> had the first patch installed, not both. Silly mistake, but turns out
> to be very interesting.
>
> So your second patch is the balance on exec stuff ... I've looked at
> it, and think it's going to be very expensive to do in practice, at
> least the simplistic "recalc everything on every exec" approach. It
> does benefit the low end schedbench results, but not the high end ones,
> and you can see the cost of your second patch in the system times of
> the kernbench.
This is interesting, indeed. As you might have seen from the tests I
posted on LKML I could not see that effect on our IA64 NUMA machine.
Which arises the question: is it expensive to recalculate the load
when doing an exec (which I should also see) or is the strategy of
equally distributing the jobs across the nodes bad for certain
load+architecture combinations? As I'm not seeing the effect, maybe
you could do the following experiment:
In sched_best_node() keep only the "while" loop at the beginning. This
leads to a cheap selection of the next node, just a simple round robin.
Regarding the schedbench results: are they averages over multiple runs?
The numa_test needs to be repeated a few times to get statistically
meaningful results.
Thanks,
Erich
> In summary, I think I like the first patch alone better than the
> combination, but will have a play at making a cross between the two.
> As I have very little context about the scheduler, would appreciate
> any help anyone would like to volunteer ;-)
>
> Corrected results are:
>
> Kernbench:
> Elapsed User System CPU
> 2.5.44-mm4 19.676s 192.794s 42.678s 1197.4%
> 2.5.44-mm4-hbaum 19.422s 189.828s 40.204s 1196.2%
> 2.5.44-mm4-focht-1 19.46s 189.838s 37.938s 1171%
> 2.5.44-mm4-focht-12 20.32s 190s 44.4s 1153.6%
>
> Schedbench 4:
> Elapsed TotalUser TotalSys AvgUser
> 2.5.44-mm4 32.45 49.47 129.86 0.82
> 2.5.44-mm4-hbaum 31.31 43.85 125.29 0.84
> 2.5.44-mm4-focht-1 38.61 45.15 154.48 1.06
> 2.5.44-mm4-focht-12 23.23 38.87 92.99 0.85
>
> Schedbench 8:
> Elapsed TotalUser TotalSys AvgUser
> 2.5.44-mm4 39.90 61.48 319.26 2.79
> 2.5.44-mm4-hbaum 32.63 46.56 261.10 1.99
> 2.5.44-mm4-focht-1 37.76 61.09 302.17 2.55
> 2.5.44-mm4-focht-12 28.40 34.43 227.25 2.09
>
> Schedbench 16:
> Elapsed TotalUser TotalSys AvgUser
> 2.5.44-mm4 62.99 93.59 1008.01 5.11
> 2.5.44-mm4-hbaum 49.78 76.71 796.68 4.43
> 2.5.44-mm4-focht-1 51.69 60.23 827.20 4.95
> 2.5.44-mm4-focht-12 51.24 60.86 820.08 4.23
>
> Schedbench 32:
> Elapsed TotalUser TotalSys AvgUser
> 2.5.44-mm4 88.13 194.53 2820.54 11.52
> 2.5.44-mm4-hbaum 54.67 147.30 1749.77 7.91
> 2.5.44-mm4-focht-1 56.71 123.62 1815.12 7.92
> 2.5.44-mm4-focht-12 55.69 118.85 1782.25 7.28
>
> Schedbench 64:
> Elapsed TotalUser TotalSys AvgUser
> 2.5.44-mm4 159.92 653.79 10235.93 25.16
> 2.5.44-mm4-hbaum 65.20 300.58 4173.26 16.82
> 2.5.44-mm4-focht-1 55.60 232.36 3558.98 17.61
> 2.5.44-mm4-focht-12 56.03 234.45 3586.46 15.76
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Thu Oct 31 2002 - 22:00:34 EST