2.4.9-ac18: DEBUG (ldm.c, 877)?

From: Eyal Lebedinsky (eyal@eyal.emu.id.au)
Date: Mon Oct 01 2001 - 07:09:13 EST


I recently moved from 2.4.10 to 2.4.9-ac18 as I just could not handle
the long pauses I get all the time. I noticed this message during
partition check. So what is wrong with basic MS-DOS partitions now?

Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
VP_IDE: IDE controller on PCI bus 00 dev 39
VP_IDE: chipset revision 16
VP_IDE: not 100% native mode: will probe irqs later
ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
VP_IDE: VIA vt82c686a (rev 22) IDE UDMA66 controller on pci00:07.1
    ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:DMA
hda: FUJITSU MPD3084AT, ATA DISK drive
hdb: QUANTUM FIREBALLlct15 20, ATA DISK drive
hdd: Pioneer DVD-ROM ATAPIModel DVD-115 0122, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 16514064 sectors (8455 MB) w/512KiB Cache, CHS=1027/255/63,
UDMA(33)
hdb: 39876480 sectors (20417 MB) w/418KiB Cache, CHS=2482/255/63,
UDMA(33)
Partition check:
 hda:<7>LDM: DEBUG (ldm.c, 877): validate_partition_table: Found basic
MS-DOS p
artition, not a dynamic disk.
 hda1 hda2 < hda5 hda6 hda7 > hda3 hda4
 hdb:<7>LDM: DEBUG (ldm.c, 877): validate_partition_table: Found basic
MS-DOS p
artition, not a dynamic disk.
 hdb1 hdb2 hdb3 hdb4

--
Eyal Lebedinsky (eyal@eyal.emu.id.au) <http://samba.anu.edu.au/eyal/>
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/



This archive was generated by hypermail 2b29 : Sun Oct 07 2001 - 21:00:14 EST