>>>>> "jeff" == Jeff Garzik <jgarzik@mandrakesoft.com> writes:
Hi jeff
I assume that this diffs are the ones in ac6. Here doesn't work
with my tulip card. I have dropped all the tulip patches and
things work well now.
jeff> Tulip driver for Digital/Intel 21x4x-based NICs. Version 0.9.5 changes:
jeff> * HPPA support (willy@puffingroup)
jeff> * CSR6 bits and tulip.h cleanup (Chris Smith)
jeff> * Improve debugging messages a bit
jeff> * Add delay after CSR13 write in t21142_start_nway
jeff> * Remove unused ETHER_STATS code
jeff> * Convert 'extern inline' to 'static inline' in tulip.h (Chris Smith)
jeff> * Update DS21143 support flags in tulip_chip_info[]
jeff> * Use spin_lock_irq, not _irqsave/restore, in tulip_start_xmit()
jeff> * Add locking to set_rx_mode()
jeff> * Fix race with chip setting DescOwned bit (Hal Murray)
jeff> * Request 100% of PIO and MMIO resource space assigned to card
jeff> * Remove error message from pci_enable_device
jeff> failure
Let me know if you need anymore information.
Later, Juan.
Brand: Micronet
Model: SP2500KW
boot messages:
Linux Tulip driver version 0.9.4.3 (Apr 14, 2000)
eth0: Digital DS21143 Tulip rev 65 at 0xec00, 00:C0:CA:19:71:8E, IRQ 17.
eth0: EEPROM default media type Autosense.
eth0: Index #0 - Media 10baseT (#0) described by a 21142 Serial PHY (2) block.
eth0: Index #1 - Media 10baseT-FD (#4) described by a 21142 Serial PHY (2) blo.
eth0: Index #2 - Media 100baseTx (#3) described by a 21143 SYM PHY (4) block.
eth0: Index #3 - Media 100baseTx-FD (#5) described by a 21143 SYM PHY (4) bloc.
lspci -n
00:11.0 Ethernet controller: Digital Equipment Corporation DECchip 21142/43 (rev 41)
lspci -vv
00:11.0 Ethernet controller: Digital Equipment Corporation DECchip 21142/43 (rev 41)
Subsystem: Digital Equipment Corporation: Unknown device 1111
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 20 min, 40 max, 64 set, cache line size 08
Interrupt: pin A routed to IRQ 17
Region 0: I/O ports at ec00 [size=128]
Region 1: Memory at febffc00 (32-bit, non-prefetchable) [size=1K]
Expansion ROM at feb80000 [disabled] [size=256K]
-- In theory, practice and theory are the same, but in practice they are different -- Larry McVoy- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Wed May 31 2000 - 21:00:26 EST