If the problem is due to the card and driver then you can just restart
networ if you have root access.
/etc/rc.d/init.d/network restart
This will shutdown the network card driver and will start again.. that will
lead to start the card again which might help.
--Vikram
----- Original Message -----
From: Torben Mathiasen <tmm@image.dk>
To: Ulrike Klein <Ulrike@klein.gg.uunet.de>
Cc: <linux-kernel@vger.rutgers.edu>
Sent: Friday, December 31, 1999 1:40 AM
Subject: Re: [tlan] Network freezes after Adaptor Error
On Wed, Dec 29 1999, Ulrike Klein wrote:
> Hello all,
>
> I'm having problems with the tlan adaptor on a Compaq ProSignia. After an
an
> adaptor error (0x40001, according to the log) the card seems to have been
> reset, but the network did not work anymore. After a reboot, everything
was OK again
> Unfortunately, the server is in a remote Office with no knowlegeable
personnel, so I
> would not like this to happen again.
>
> The card is a Compaq NetFlex 3/3p Revision 16
>
> Any ideas apart from replacing the adaptor?
>
Hard to say what went wrong. I might need some more info like kernel
version, more log
info and wether the driver was builtin or module. When did you first
encounter this
problem??
Torben Mathiasen
TLan Maintainer
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Sat Jan 15 2000 - 21:00:17 EST