> Useful information would also include the driver detection message,
> giving whether the card is operating in shared memory or I/O mode,
> the output of "cat /proc/net/dev" and any error/warnings reported
> by the driver (use "dmesg").
>
> If there is nothing obviously wrong in that then you may need to use
> tcpdump to get a better look at what is happening during a slowdown.
No warnings on detection, here is the output of those commands:
smc-ultra.c:v2.02 2/3/98 Donald Becker (becker@cesdis.gsfc.nasa.gov)
eth0: SMC EtherEZ at 0x240, 00 E0 29 03 E4 79,assigned IRQ 11
programmed-I/O mode.
[09:40:30] root@obsidian:/tmp $ cat /proc/net/dev
Inter-| Receive |
Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes
packets errs drop fifo colls carrier compressed
lo:19186329 45882 0 0 0 0 0 0 19186329
45882 0 0 0 0 0 0
eth0:218668534 344342 0 0 0 460 0 268579
4136831 58853 74 0 0 30303 148 0
I'm going to try and get it to go into sluggish mode later today and get
some tcpdump info.
Scott
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.0.0 (GNU/Linux)
Comment: For info see http://www.gnupg.org
iD8DBQE4EHfkpXyM95IyRhURAkq7AJ93UUpHeWzqtrYx4bYe9MWu0Ve90ACgls1K
aAfanUb17yK1Eq+klq0vZ1Q=
=soyo
-----END PGP SIGNATURE-----
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/