1.
IDE-SCSI causes anything that accesses it to go into the "D" state in
ps
2.
I recently purchased an IDE CD-R from a buddy of mine and am attempting
to use it under linux. I have attempted to follow all the directions in
the CD-Writing-HOWTO file to enable a IDE CD-R.
3.
modules, ide-scsi, ide cd-r
4.
Linux version 2.2.1 (root@borg) (gcc version 2.7.2.3) #3 SMP Sun Feb 7
14:34:02 EST 1999
5.
[root@borg scsi]# insmod -k ide-scsi
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
scsi : 1 host.
Vendor: MITSUMI Model: CR-2801TE Rev: 1.10
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
scsi0 channel 0 : resetting for second half of retries.
SCSI bus is being reset for host 0 channel 0.
scsi : aborting command due to timeout : pid 2, scsi0, channel 0, id 0, lun 1 Request Sense 20 00 00 10 00
6.
N/A
7.
7.1.
-- Versions installed: (if some fields are empty or looks
-- unusual then possibly you have very old versions)
Linux borg 2.2.1 #3 SMP Sun Feb 7 14:34:02 EST 1999 i586 unknown
Kernel modules 2.1.85
Gnu C 2.7.2.3
Binutils 2.9.1.0.15
Linux C Library 2.0.7
Dynamic linker ldd (GNU libc) 2.0.7
Linux C++ Library 2.8.0
Procps 1.2.9
Mount 2.8a
Net-tools (1998-06-29)
Kbd 0.96
Sh-utils 1.16
7.2.
processor : 0
vendor_id : GenuineIntel
cpu family : 5
model : 4
model name : Pentium MMX
stepping : 3
cpu MHz : 199.423737
fdiv_bug : no
hlt_bug : no
sep_bug : no
f00f_bug : yes
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr mce cx8 apic mmx
bogomips : 398.13
processor : 1
vendor_id : GenuineIntel
cpu family : 5
model : 4
model name : Pentium MMX
stepping : 3
cpu MHz : 199.423737
fdiv_bug : no
hlt_bug : no
sep_bug : no
f00f_bug : yes
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr mce cx8 apic mmx
bogomips : 398.13
7.3.
ide-scsi 6704 (uninitialized)
sr_mod 18224 0 (autoclean) (unused)
cdrom 11544 0 (autoclean) [sr_mod]
sg 3764 0 (autoclean) (unused)
scsi_mod 54724 2 (autoclean) [ide-scsi sr_mod sg]
serial 17632 1 (autoclean)
nls_iso8859-1 2024 2 (autoclean)
nls_cp437 3548 2 (autoclean)
vfat 11316 2 (autoclean)
fat 23640 2 (autoclean) [vfat]
7.4.
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: MITSUMI Model: CR-2801TE Rev: 1.10
Type: CD-ROM ANSI SCSI revision: 02
7.5.
output of ps x for the modprobe
462 1 D 0:02 insmod -k ide-scsi
X.
The firmware has been updated to the most current version, and is
fully functional under windows using Adaptec Easy CD Creator for both
audio and data CDs. So the CD-R is functional in the system.
Also the kernel seems to go into a loop. The load goes to 1, and there
are no processes that are taking up any more than 3-5% (top).
TIA,
Mark
-- Mark Szlaga mszlaga@umd.umich.edu http://www.umd.umich.edu/~mszlaga/ /dev/hdb5 - 0.5Gb of spinning metal, all alone in the night... - unknown - alt.sysadmin.recovery /dev/hdb5 - our last best hope for free space... - Chip Salzenberg - <chip@pobox.com>
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/