Linux PCMCIA Card Services 3.0.8
kernel build: 2.2.0-pre6-ac1 #8 Sun Jan 10 20:19:20 CET 1999
options: [pci] [apm]
Intel PCIC probe:
TI 1131 PCI-to-CardBus at bus 0 slot 4, mem 0x68000000, 2 sockets
host opts [0]: [pci + serial irq] [no pci irq] [lat 168/176] [bus
32/34]
host opts [1]: [pci + serial irq] [no pci irq] [lat 168/176] [bus
35/37]
ISA irqs (default) = 3 polling interval = 1000 ms
cs: IO port probe 0x0120-0x012f: clean.
cs: IO port probe 0x02f8-0x02ff: clean.
cs: memory probe 0x9001000-0x9001fff: clean.
eth0: 3Com 3c589, port 0x120, irq 3, Auto port, hw_addr
00:00:86:18:84:94
tty01 at 0x02f8 (irq = 3) is a 16550A
-- Request that you change the /etc/pcmcia/serial on how it handles cua devices. I always have to make the following change because even with 2.2 kernels the cua devices still exist.# Newer kernels do not have "cua" devices #if [ -c /dev/cua1 ] ; then # NR=`expr $MINOR - 64` # DIALOUT=cua$NR #else # DIALOUT=$DEVICE #fi DIALOUT=$DEVICE
Sincerely, Todd A. Wood Wood Consulting Group, Inc.
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/