It locks up tight.
During boot-up the SCSI subsystem is initialized with no errors. Local
partitions are mounted, then /etc/init.d/network is called. The
following appears (this is the log entry from an SMP kernel boot since
the lock-up in the non-SMP kernel prevents any info being written to
the logs).
Jan 10 13:23:18 oppy kernel: eth0: Intel EtherExpress Pro 10/100 at
0xff40, 00:A0:C9:55:96:BB, IRQ 18.
^^ this is 11 with the non-SMP kernel
Jan 10 13:23:18 oppy kernel: Board assembly 645520-034, Physical connectors present: RJ45
Jan 10 13:23:18 oppy kernel: Primary interface chip DP83840 PHY #1.
Jan 10 13:23:18 oppy kernel: DP83840 specific setup, setting register 23 to 8462.
Jan 10 13:23:18 oppy kernel: General self-test: passed.
Jan 10 13:23:18 oppy kernel: Serial sub-system self-test: passed.
Jan 10 13:23:18 oppy kernel: Internal registers self-test: passed.
Jan 10 13:23:18 oppy kernel: ROM checksum self-test: passed (0x49caa8d6).
Jan 10 13:23:18 oppy kernel: Receiver lock-up workaround activated.
Nothing else appears. I have to hard-reset or powercycle.
==Jamie
-- Jamie Raymond Sabetha, Kansas jraymond@gnu.org- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/