Upon building the 2.2pre kernels, I get the error message
TIOCSER?WILD ioctl obsolete, ignored
twice during the boot process.
Attached find my 'dmesg' output as well as my .config. I can provide more
information upon request.
Alec Smith
--=====================_915438993==_
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
Content-Disposition: attachment; filename="config"
#
# Automatically generated make config: don't edit
#
#
# Code maturity level options
#
# CONFIG_EXPERIMENTAL is not set
#
# Processor type and features
#
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not=
set
CONFIG_M686=3Dy
CONFIG_X86_WP_WORKS_OK=3Dy
CONFIG_X86_INVLPG=3Dy
CONFIG_X86_BSWAP=3Dy
CONFIG_X86_POPAD_OK=3Dy
CONFIG_X86_TSC=3Dy
CONFIG_X86_GOOD_APIC=3Dy
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=3Dy
# CONFIG_SMP is not set
#
# Loadable module support
#
CONFIG_MODULES=3Dy
# CONFIG_MODVERSIONS is not set
# CONFIG_KMOD is not set
#
# General setup
#
CONFIG_NET=3Dy
CONFIG_PCI=3Dy
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GODIRECT is not=
set
CONFIG_PCI_GOANY=3Dy
CONFIG_PCI_BIOS=3Dy
CONFIG_PCI_DIRECT=3Dy
CONFIG_PCI_QUIRKS=3Dy
CONFIG_PCI_OLD_PROC=3Dy
# CONFIG_MCA is not set
CONFIG_SYSVIPC=3Dy
# CONFIG_BSD_PROCESS_ACCT is not=
set
CONFIG_SYSCTL=3Dy
CONFIG_BINFMT_AOUT=3Dy
CONFIG_BINFMT_ELF=3Dy
CONFIG_BINFMT_MISC=3Dy
CONFIG_PARPORT=3Dy
CONFIG_PARPORT_PC=3Dy
# CONFIG_PARPORT_OTHER is not set
# CONFIG_APM is not set
#
# Plug and Play support
#
CONFIG_PNP=3Dy
# CONFIG_PNP_PARPORT is not set
#
# Block devices
#
CONFIG_BLK_DEV_FD=3Dy
CONFIG_BLK_DEV_IDE=3Dy
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_HD_IDE is not=
set
CONFIG_BLK_DEV_IDEDISK=3Dy
CONFIG_BLK_DEV_IDECD=3Dy
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_RZ1000 is not=
set
CONFIG_BLK_DEV_IDEPCI=3Dy
CONFIG_BLK_DEV_IDEDMA=3Dy
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_IDEDMA_AUTO=3Dy
# CONFIG_IDE_CHIPSETS is not set
#
# Additional Block Devices
#
CONFIG_BLK_DEV_LOOP=3Dm
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_MD is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_BLK_DEV_XD is not set
CONFIG_PARIDE_PARPORT=3Dy
# CONFIG_PARIDE is not set
# CONFIG_BLK_DEV_HD is not set
#
# Networking options
#
CONFIG_PACKET=3Dy
# CONFIG_NETLINK is not set
# CONFIG_FIREWALL is not set
# CONFIG_NET_ALIAS is not set
# CONFIG_FILTER is not set
CONFIG_UNIX=3Dy
CONFIG_INET=3Dy
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
# CONFIG_IP_ROUTER is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_ALIAS is not set
# CONFIG_SYN_COOKIES is not set
#
# (it is safe to leave these untouched)
#
# CONFIG_INET_RARP is not set
CONFIG_IP_NOSR=3Dy
CONFIG_SKB_LARGE=3Dy
#
#
#
CONFIG_IPX=3Dm
# CONFIG_IPX_INTERN is not set
# CONFIG_ATALK is not set
#
# SCSI support
#
CONFIG_SCSI=3Dy
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=3Dy
# CONFIG_CHR_DEV_ST is not set
# CONFIG_BLK_DEV_SR is not set
CONFIG_CHR_DEV_SG=3Dy
#
# Some SCSI devices (e.g. CD jukebox) support multiple=
LUNs
#
CONFIG_SCSI_MULTI_LUN=3Dy
CONFIG_SCSI_CONSTANTS=3Dy
# CONFIG_SCSI_LOGGING is not set
#
# SCSI low-level drivers
#
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AHA1740 is not set
# CONFIG_SCSI_AIC7XXX is not set
CONFIG_SCSI_ADVANSYS=3Dy
# CONFIG_SCSI_IN2000 is not set
# CONFIG_SCSI_AM53C974 is not set
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_DMA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_INITIO is not set
CONFIG_SCSI_PPA=3Dy
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_IZIP_EPP16 is not set
# CONFIG_SCSI_IZIP_SLOW_CTR is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_NCR53C7xx is not set
# CONFIG_SCSI_NCR53C8XX is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PCI2000 is not set
# CONFIG_SCSI_PCI2220I is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_SEAGATE is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_ULTRASTOR is not set
#
# Network device support
#
CONFIG_NETDEVICES=3Dy
# CONFIG_ARCNET is not set
CONFIG_DUMMY=3Dm
# CONFIG_EQUALIZER is not=
set
CONFIG_NET_ETHERNET=3Dy
CONFIG_NET_VENDOR_3COM=3Dy
# CONFIG_EL1 is not set
# CONFIG_EL2 is not set
# CONFIG_ELPLUS is not set
# CONFIG_EL3 is not set
# CONFIG_3C515 is not set
CONFIG_VORTEX=3Dy
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set
# CONFIG_NET_ISA is not set
# CONFIG_NET_EISA is not set
# CONFIG_NET_POCKET is not set
# CONFIG_FDDI is not set
# CONFIG_DLCI is not set
# CONFIG_PLIP is not set
CONFIG_PPP=3Dm
#
# CCP compressors for PPP are only built as modules.
#
# CONFIG_SLIP is not set
# CONFIG_NET_RADIO is not set
# CONFIG_TR is not set
# CONFIG_HOSTESS_SV11 is not set
# CONFIG_COSA is not set
# CONFIG_WAN_DRIVERS is not set
# CONFIG_LAPBETHER is not set
# CONFIG_X25_ASY is not set
#
# Amateur Radio support
#
# CONFIG_HAMRADIO is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# CD-ROM drivers (not for SCSI or IDE/ATAPI drives)
#
# CONFIG_CD_NO_IDESCSI is not set
#
# Character devices
#
CONFIG_VT=3Dy
CONFIG_VT_CONSOLE=3Dy
CONFIG_SERIAL=3Dy
# CONFIG_SERIAL_CONSOLE is not set
# CONFIG_SERIAL_EXTENDED is not set
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_UNIX98_PTYS is not set
CONFIG_PRINTER=3Dm
CONFIG_PRINTER_READBACK=3Dy
# CONFIG_MOUSE is not set
# CONFIG_QIC02_TAPE is not set
# CONFIG_WATCHDOG is not set
# CONFIG_NVRAM is not set
# CONFIG_RTC is not set
#
# Video For Linux
#
CONFIG_VIDEO_DEV=3Dy
# CONFIG_RADIO_RTRACK is not set
# CONFIG_RADIO_RTRACK2 is not set
# CONFIG_RADIO_AZTECH is not set
# CONFIG_RADIO_MIROPCM20 is not set
# CONFIG_RADIO_GEMTEK is not set
# CONFIG_VIDEO_BT848 is not set
CONFIG_VIDEO_BWQCAM=3Dm
# CONFIG_VIDEO_CQCAM is not set
# CONFIG_VIDEO_PMS is not set
# CONFIG_VIDEO_SAA5249 is not set
# CONFIG_RADIO_SF16FMI is not set
# CONFIG_RADIO_ZOLTRIX is not set
#
# Joystick support
#
# CONFIG_JOYSTICK is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
#
# Filesystems
#
CONFIG_QUOTA=3Dy
# CONFIG_AUTOFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
CONFIG_FAT_FS=3Dy
CONFIG_MSDOS_FS=3Dy
# CONFIG_UMSDOS_FS is not=
set
CONFIG_VFAT_FS=3Dy
CONFIG_ISO9660_FS=3Dy
CONFIG_JOLIET=3Dy
# CONFIG_MINIX_FS is not set
CONFIG_NTFS_FS=3Dy
# CONFIG_HPFS_FS is not set
CONFIG_PROC_FS=3Dy
# CONFIG_ROMFS_FS is not set
CONFIG_EXT2_FS=3Dy
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
# CONFIG_CODA_FS is not set
CONFIG_NFS_FS=3Dy
# CONFIG_NFSD_SUN is not set
CONFIG_SUNRPC=3Dy
CONFIG_LOCKD=3Dy
# CONFIG_SMB_FS is not set
# CONFIG_NCP_FS is not set
#
# Partition Types
#
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MAC_PARTITION is not set
# CONFIG_SMD_DISKLABEL is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
CONFIG_NLS=3Dy
#
# Native Language Support
#
CONFIG_NLS_CODEPAGE_437=3Dy
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
CONFIG_NLS_ISO8859_1=3Dy
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
#
# Console drivers
#
CONFIG_VGA_CONSOLE=3Dy
# CONFIG_VIDEO_SELECT is not set
#
# Sound
#
# CONFIG_SOUND is not set
#
# Kernel hacking
#
# CONFIG_MAGIC_SYSRQ is not set
--=====================_915438993==_
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
Content-Disposition: attachment; filename="error"
Linux version 2.2.0-pre4-ac1 (root@rs229032) (gcc version 2.7.2.3) #1 Sun=
Jan 3 22:03:12 EST 1999
Detected 350798892 Hz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 349.80 BogoMIPS
Memory: 127860k/131072k available (992k kernel code, 412k reserved, 1752k=
data, 56k init)
VFS: Diskquotas version dquot_6.4.0 initialized
CPU: Intel Pentium II (Deschutes) stepping 01
Checking 386/387 coupling... OK, FPU using exception 16 error=
reporting.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.26 (19981001) Richard Gooch (rgooch@atnf.csiro.au)
PCI: PCI BIOS revision 2.10 entry at 0xfdb81
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Enabling I/O for device 00:3a
Swansea University Computer Society NET3.039 for Linux 2.1
NET3: Unix domain sockets 0.16 for Linux NET3.038.
Swansea University Computer Society TCP/IP for NET3.037
IP Protocols: ICMP, UDP, TCP
Starting kswapd v 1.5
parport0: PC-style at 0x378 [SPP]
Serial driver version 4.27 with no serial options enabled
ttyS00 at 0x03f8 (irq =3D 4) is a 16550A
ttyS01 at 0x02f8 (irq =3D 3) is a 16550A
Linux video capture interface: v1.00
PIIX4: IDE controller on PCI bus 00 dev 39
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio
hda: WDC AC34300L, ATA DISK drive
hdb: WDC AC310100B, ATA DISK drive
hdc: FX162T4, ATAPI CDROM drive
hdd: QUANTUM ELS127A, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: WDC AC34300L, 4104MB w/256kB Cache, CHS=3D523/255/63, UDMA
hdb: WDC AC310100B, 9671MB w/512kB Cache, CHS=3D1232/255/63, UDMA
hdd: QUANTUM ELS127A, 122MB w/32kB Cache, CHS=3D919/16/17
hdc: ATAPI 16X CDROM drive, 128kB Cache
Uniform CDROM driver Revision: 2.51
Floppy drive(s): fd0 is 1.44M, fd1 is 1.2M
FDC 0 is a National Semiconductor PC87306
ppa: Version 2.03 (for Linux 2.0.0)
ppa: Found device at ID 6, Attempting to use EPP 32 bit
ppa: Found device at ID 6, Attempting to use SPP
ppa: Communication established with ID 6 using SPP
scsi0 : AdvanSys SCSI 3.1E: PCI Ultra-Wide: BIOS C8000/7FFF, IO EF00/3F, IRQ=
11
scsi1 : Iomega VPI0 (ppa) interface
scsi : 2 hosts.
Vendor: HP Model: C5110A Rev: 3638
Type: Processor ANSI SCSI revision: 02
Detected scsi generic sga at scsi0, channel 0, id 2, lun 0
Vendor: IOMEGA Model: ZIP 100 Rev: D.09
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi removable disk sda at scsi1, channel 0, id 6, lun 0
scsi : detected 1 SCSI disk total.
sda : READ CAPACITY failed.
sda : status =3D 0, message =3D 00, host =3D 0, driver =3D 28
sda : extended sense code =3D 2
sda : block size assumed to be 512 bytes, disk size 1GB.
eth0: 3Com 3c905 Boomerang 100baseTx at 0xee80, 00:60:08:c6:3d:4a, IRQ 9
8K word-wide RAM 3:5 Rx:Tx split, NWay Autonegotiation interface.
MII transceiver found at address 24, status 7869.
Enabling bus-master transmits and whole-frame receives.
3c59x.c:v0.99E 5/12/98 Donald Becker=
http://cesdis.gsfc.nasa.gov/linux/drivers/vortex.html
Partition check:
sda:scsidisk I/O error: dev 08:00, sector 0
unable to read partition table
hda: hda1 hda2 < hda5 > hda3
hdb: hdb1 hdb2 hdb3 < hdb5 hdb6 hdb7 >
hdd: hdd1
NTFS version 990102
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 56k freed
Adding Swap: 130748k swap-space (priority -1)
Adding Swap: 124968k swap-space (priority -2)
TIOCSER?WILD ioctl obsolete, ignored.
TIOCSER?WILD ioctl obsolete, ignored.
--=====================_915438993==_--
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/