> >From /proc/pci, it is:
>
> Bus 0, device 15, function 0:
> IDE interface: Acer Labs M5229 TXpro (rev 32).
> Medium devsel. Fast back-to-back capable. Master Capable.
> Latency=32. Min Gnt=2.Max Lat=4.
> I/O at 0xffa0.
>
> My manual claims an Alladin 5 M1541/M1543 chipset and an onboard
> PCI Alladin M1543 IDE with PIO, Bus Master and UDMA/33 operation modes....
5229/1533/1531 is Aladdin IV+ (TXpro) chipset, so it seems like
your kernel identifies the V as a IV+. (I do have a IV+ chipset
on my board, and I was the one who reported its identification
to be included in the kernel recognition).
I remember that when I sent the mail about the IV+, somebody said
that there is already a conflict (or an insureness) about two
Acer devices sharing the same ID. Sorry, I lost that mail.
Wait a second.. My "real" M5229 says "[...] back-to-back
capable. IRQ 15. Master Capable. [...]". It seems that
on your Aladdin V there is no IRQ used/detected? Maybe
we could use this to detect the right chipset? (Output
from 2.0.36pre15)
ciao,
johnny
-- Trust noone.- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/