Hi,
I still have a problem with my MS-5159 Board with the K6-2/300.
I overcome the IRQ routing problem (IDE interrupt on 0) by booting
Windows 95 and returning to DOS mode before booting linux with loadlin.
Still, when using a 2.0.34 kernel I get the hda: irq timeout { DriveReady ...
error and the system hangs. When using the 2.0.35 kernel the system simply
stops working after a while. No messages, nothing.
I assume it has to do with the ALI V chipset that is initialized in a wrong
way and probably has some bugs. The hdparm program tells me that my disk
an IBM as mailed before has no special settings enabled. 16-bit access, no
DMA mode etc.
I would be really happy if anyone could give me help on that problem as
even the 2.1.x kernel tell me that the PCI_IDE chipset is unknown and not
100% native mode.
Thanks,
Leo.
------- =_aaaaaaaaaa0
Content-Type: text/plain; charset="us-ascii"
Content-ID: <21231.902835040.2@tanis.first.gmd.de>
Content-Description: Signature of Matthias L. Jugel
Matthias L. Jugel -- GMD FIRST Berlin Adlershof
Tel: +49 030 6392 1821 Email: leo@first.gmd.de
Es gibt zwei Arten von Narren. Der eine sagt: "Dies ist alt und
deshalb gut." Und der andere sagt: "Dies ist neu und deshalb besser."
------- =_aaaaaaaaaa0--
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.altern.org/andrebalsa/doc/lkml-faq.html