The only thing I can do is hit the reset button.
Thanks!
Jeff
(scsi0) <Adaptec AHA-394X SCSI host adapter> found at PCI 4/0
(scsi0) Wide Channel A, SCSI ID=7, 16/255 SCBs
(scsi0) BIOS enabled, IO Port 0xe000, IRQ 4
(scsi0) IO Memory at 0xd8000000, MMAP Memory at 0x8805000
(scsi0) Downloading sequencer code... 406 instructions downloaded
(scsi1) <Adaptec AHA-394X SCSI host adapter> found at PCI 5/0
(scsi1) Wide Channel B, SCSI ID=7, 16/255 SCBs
(scsi1) BIOS enabled, IO Port 0xe400, IRQ 5
(scsi1) IO Memory at 0xd8001000, MMAP Memory at 0x8807000
(scsi1) Downloading sequencer code... 406 instructions downloaded
scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.0.19/3.2.4
<Adaptec AHA-394X SCSI host adapter>
scsi1 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.0.19/3.2.4
<Adaptec AHA-394X SCSI host adapter>
scsi : 2 hosts.
(scsi0:0:-1:-1) Scanning channel for devices.
Vendor: IBMRISC Model: DFHSS2W Rev: 4242
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sda at scsi0, channel 0, id 0, lun 0
(scsi0:0:0:0) Using wide (16 bit) transfers.
(scsi0:0:0:0) Synchronous at 10.0MHz, offset 8.
(scsi1:0:-1:-1) Scanning channel for devices.
Vendor: SEAGATE Model: ST410800N Rev: 0025
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sdb at scsi1, channel 0, id 1, lun 0
(scsi1:0:1:0) Synchronous at 10.0MHz, offset 15.
scsi : detected 2 SCSI disks total.
SCSI device sda: hdwr sector= 512 bytes. Sectors= 4404489 [2150 MB] [2.2 GB]
SCSI device sdb: hdwr sector= 512 bytes. Sectors= 17755614 [8669 MB] [8.7 GB]
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.altern.org/andrebalsa/doc/lkml-faq.html