I'd love some help with a scsi problem I've been having. Below
you'll find a bunch of info about my system, and once crash earlier today.
Basically, I have a SMP system, with 2 AHA-1522 cards.... When they are
used together, the kernel crashes regularly.
I've spoken to Ingo, and he seems to think it is a SCSI issue. At
any rate, anyone care to contact me privately and see if we can iron this
out?
*lots of data to follow*
** /var/adm/syslog. Note: Due to the log size not being large enough, I've wrapped from the next boot, to show I'm using gcc 2.7.2.3 etc... They are the same kernels...
Jun 1 09:32:05 shonpc1 syslogd: exiting on signal 15
Jun 1 09:33:58 shonpc1 kernel: I/O APIC #2 Version 17 at 0xFEC00000.
Jun 1 09:33:58 shonpc1 kernel: Processors: 2
Jun 1 09:33:58 shonpc1 kernel: Console: 16 point font, 400 scans
Jun 1 09:33:58 shonpc1 kernel: Console: colour VGA+ 80x25, 1 virtual console (max 63)
Jun 1 09:33:58 shonpc1 kernel: Calibrating delay loop... 265.42 BogoMIPS
Jun 1 09:33:58 shonpc1 kernel: Memory: 95056k/98304k available (1296k kernel code, 400k reserved, 1512k data, 40k init)
Jun 1 09:33:58 shonpc1 kernel: Initializing RT netlink socket
Jun 1 09:33:58 shonpc1 kernel: POSIX conformance testing by UNIFIX
Jun 1 09:33:58 shonpc1 kernel: mtrr: v1.20 (19980502) Richard Gooch (rgooch@atnf.csiro.au)
Jun 1 09:33:58 shonpc1 kernel: CPU0: Intel Pentium II (Klamath) stepping 04
Jun 1 09:33:58 shonpc1 kernel: calibrating APIC timer ...
Jun 1 09:33:58 shonpc1 kernel: ..... CPU clock speed is 265.9180 MHz.
Jun 1 09:33:58 shonpc1 kernel: ..... APIC bus clock speed is 66.4792 MHz.
Jun 1 09:33:58 shonpc1 kernel: Booting processor 1 eip 2000
Jun 1 09:33:58 shonpc1 kernel: Calibrating delay loop... 265.42 BogoMIPS
Jun 1 09:33:58 shonpc1 kernel: OK.
Jun 1 09:33:58 shonpc1 kernel: CPU1: Intel Pentium II (Klamath) stepping 04
Jun 1 09:33:58 shonpc1 kernel: enabling Symmetric IO mode ... ...done.
Jun 1 09:33:58 shonpc1 kernel: ENABLING IO-APIC IRQs
Jun 1 09:33:58 shonpc1 kernel: init IO_APIC IRQs
Jun 1 09:33:58 shonpc1 kernel: IO-APIC pin 0, 2, 15, 21, 22, 23 not connected.
Jun 1 09:33:58 shonpc1 kernel: ..trying to set up timer as ExtINT ... .. (found pin 0) ... works.
Jun 1 09:33:58 shonpc1 kernel: nr of MP irq sources: 37.
Jun 1 09:33:58 shonpc1 kernel: nr of IO-APIC registers: 24.
Jun 1 09:33:58 shonpc1 kernel: testing the IO APIC.......................
Jun 1 09:33:58 shonpc1 kernel: .... register #00: 00000000
Jun 1 09:33:58 shonpc1 kernel: ....... : physical APIC id: 00
Jun 1 09:33:58 shonpc1 kernel: .... register #01: 00170011
Jun 1 09:33:58 shonpc1 kernel: ....... : max redirection entries: 0017
Jun 1 09:33:58 shonpc1 kernel: ....... : IO APIC version: 0011
Jun 1 09:33:58 shonpc1 kernel: .... register #02: 00000000
Jun 1 09:33:58 shonpc1 kernel: ....... : arbitration: 00
Jun 1 09:33:58 shonpc1 kernel: .... IRQ redirection table:
Jun 1 09:33:58 shonpc1 kernel: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
Jun 1 09:33:58 shonpc1 kernel: 00 0FF 0F 0 0 0 0 0 1 7 51
Jun 1 09:33:58 shonpc1 kernel: 01 0FF 0F 0 0 0 0 0 1 1 59
Jun 1 09:33:58 shonpc1 kernel: 02 000 00 1 0 0 0 0 0 0 00
Jun 1 09:33:58 shonpc1 kernel: 03 0FF 0F 0 0 0 0 0 1 1 69
Jun 1 09:33:58 shonpc1 kernel: 04 0FF 0F 0 0 0 0 0 1 1 71
Jun 1 09:33:58 shonpc1 kernel: 05 0FF 0F 0 0 0 0 0 1 1 79
Jun 1 09:33:58 shonpc1 kernel: 06 0FF 0F 0 0 0 0 0 1 1 81
Jun 1 09:33:58 shonpc1 kernel: 07 0FF 0F 0 0 0 0 0 1 1 89
Jun 1 09:33:58 shonpc1 kernel: 08 0FF 0F 0 0 0 0 0 1 1 91
Jun 1 09:33:58 shonpc1 kernel: 09 0FF 0F 0 0 0 0 0 1 1 99
Jun 1 09:33:58 shonpc1 kernel: 0a 0FF 0F 0 0 0 0 0 1 1 A1
Jun 1 09:33:58 shonpc1 kernel: 0b 0FF 0F 0 0 0 0 0 1 1 A9
Jun 1 09:33:58 shonpc1 nfsd[60]: setsockopt failed: Invalid argument
Jun 1 09:33:59 shonpc1 nfsd[60]: setsockopt failed: Invalid argument
Jun 1 09:33:58 shonpc1 kernel: 0c 0FF 0F 0 0 0 0 0 1 1 B1
Jun 1 09:33:58 shonpc1 kernel: 0d 000 00 1 0 0 0 0 0 0 00
Jun 1 09:33:58 shonpc1 kernel: 0e 0FF 0F 0 0 0 0 0 1 1 C1
Jun 1 09:33:58 shonpc1 kernel: 0f 000 00 1 0 0 0 0 0 0 00
Jun 1 09:33:58 shonpc1 kernel: 10 0FF 0F 0 1 0 1 0 1 1 D1
Jun 1 09:33:58 shonpc1 kernel: 11 0FF 0F 0 1 0 1 0 1 1 D9
Jun 1 09:33:58 shonpc1 kernel: 12 0FF 0F 0 1 0 1 0 1 1 E1
Jun 1 09:33:58 shonpc1 kernel: 13 0FF 0F 0 1 0 1 0 1 1 E9
Jun 1 09:33:58 shonpc1 kernel: 14 0FF 0F 0 0 0 0 0 1 1 C9
Jun 1 09:33:58 shonpc1 kernel: 15 000 00 1 0 0 0 0 0 0 00
Jun 1 09:33:58 shonpc1 kernel: 16 000 00 1 0 0 0 0 0 0 00
Jun 1 09:33:58 shonpc1 kernel: 17 000 00 1 0 0 0 0 0 0 00
Jun 1 09:33:58 shonpc1 kernel: IRQ to pin mappings:
Jun 1 09:33:58 shonpc1 kernel: 0->-1 1->1 2->-1 3->3 4->4 5->5 6->6 7->7 8->8 9->9 10->10 11->11 12->12 13->13 14->14 15->20 16->16 17->17 18->18 19->19 20->-1 21->-1 22->-1 23->-1
Jun 1 09:33:58 shonpc1 kernel: .................................... done.
Jun 1 09:33:58 shonpc1 kernel: PCI: PCI BIOS revision 2.10 entry at 0xfcc4e
Jun 1 09:33:58 shonpc1 kernel: PCI: Using configuration type 1
Jun 1 09:33:58 shonpc1 kernel: PCI: Probing PCI hardware
Jun 1 09:33:58 shonpc1 kernel: PCI->APIC IRQ transform: (B1,I8,P0) -> 19
Jun 1 09:33:58 shonpc1 kernel: PCI->APIC IRQ transform: (B0,I16,P0) -> 16
Jun 1 09:33:58 shonpc1 kernel: Starting kswapd v 1.5
Jun 1 09:33:58 shonpc1 kernel: Software Watchdog Timer: 0.05, timer margin: 60 sec
Jun 1 09:33:58 shonpc1 kernel: <Crystal audio controller (CS4236)> at 0x530 irq 5 dma 0,3
Jun 1 09:33:58 shonpc1 kernel: <MPU-401 (UART) MIDI> at 0x330 irq 7
Jun 1 09:33:58 shonpc1 kernel: <Yamaha OPL3 FM> at 0x388
Jun 1 09:33:58 shonpc1 kernel: PIIX3: IDE controller on PCI bus 00 dev 69
Jun 1 09:33:58 shonpc1 kernel: PIIX3: not 100ative mode: will probe irqs later
Jun 1 09:33:58 shonpc1 kernel: ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA
Jun 1 09:33:58 shonpc1 kernel: ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:pio
Jun 1 09:33:58 shonpc1 kernel: hda: QUANTUM FIREBALL ST4.3A, ATA DISK drive
Jun 1 09:33:58 shonpc1 kernel: hdb: Conner Peripherals 540MB - CFS540A, ATA DISK drive
Jun 1 09:33:58 shonpc1 kernel: hdc: NEC CD-ROM DRIVE:288, ATAPI CDROM drive
Jun 1 09:33:58 shonpc1 kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Jun 1 09:33:58 shonpc1 kernel: ide1 at 0x170-0x177,0x376 on irq 15
Jun 1 09:33:58 shonpc1 kernel: hdc: ATAPI 24X CDROM drive, 128kB Cache
Jun 1 09:33:58 shonpc1 kernel: md driver 0.36.6 MAX_MD_DEV=4, MAX_REAL=8
Jun 1 09:33:58 shonpc1 kernel: raid0 personality registered
Jun 1 09:33:58 shonpc1 kernel: raid5 personality registered
Jun 1 09:33:58 shonpc1 kernel: aha152x: BIOS test: passed, auto configuration: ok, detected 2 controller(s)
Jun 1 09:33:58 shonpc1 kernel: aha152x0: vital data: PORTBASE=0x340, IRQ=10, SCSI ID=7, reconnect=enabled, parity=enabled, synchronous=disabled, delay=100, extended translation=disabled
Jun 1 09:33:58 shonpc1 kernel: aha152x: trying software interrupt, ok.
Jun 1 09:33:58 shonpc1 kernel: aha152x1: vital data: PORTBASE=0x140, IRQ=9, SCSI ID=7, reconnect=enabled, parity=enabled, synchronous=disabled, delay=100, extended translation=disabled
Jun 1 09:33:58 shonpc1 kernel: aha152x: trying software interrupt, ok.
Jun 1 09:33:58 shonpc1 kernel: scsi0 : Adaptec 152x SCSI driver; $Revision: 1.7 $
Jun 1 09:33:58 shonpc1 kernel: scsi1 : Adaptec 152x SCSI driver; $Revision: 1.7 $
Jun 1 09:33:58 shonpc1 kernel: scsi : 2 hosts.
Jun 1 09:33:58 shonpc1 kernel: Vendor: SEAGATE Model: ST41650 Rev: 7628
Jun 1 09:33:58 shonpc1 kernel: Type: Direct-Access ANSI SCSI revision: 02
Jun 1 09:33:58 shonpc1 kernel: Detected scsi disk sda at scsi0, channel 0, id 0, lun 0
Jun 1 09:33:58 shonpc1 kernel: Vendor: QUANTUM Model: FIREBALL1080S Rev: 1Q09
Jun 1 09:33:58 shonpc1 kernel: Type: Direct-Access ANSI SCSI revision: 02
Jun 1 09:33:58 shonpc1 kernel: Detected scsi disk sdb at scsi0, channel 0, id 3, lun 0
Jun 1 09:33:58 shonpc1 kernel: Vendor: SyQuest Model: SQ555 Rev: F5L
Jun 1 09:33:58 shonpc1 kernel: Type: Direct-Access ANSI SCSI revision: 01 CCS
Jun 1 09:33:58 shonpc1 kernel: Detected scsi removable disk sdc at scsi0, channel 0, id 5, lun 0
Jun 1 09:33:58 shonpc1 kernel: Vendor: EXABYTE Model: EXB-850052banxr3 Rev: 042U
Jun 1 09:33:58 shonpc1 kernel: Type: Sequential-Access ANSI SCSI revision: 02
Jun 1 09:33:58 shonpc1 kernel: Vendor: HP Model: C2247-300 Rev: 0BA4
Jun 1 09:33:58 shonpc1 kernel: Type: Direct-Access ANSI SCSI revision: 02
Jun 1 09:33:58 shonpc1 kernel: Detected scsi disk sdd at scsi1, channel 0, id 2, lun 0
Jun 1 09:33:58 shonpc1 kernel: Vendor: SyQuest Model: SQ555 Rev: G6B
Jun 1 09:33:58 shonpc1 kernel: Type: Direct-Access ANSI SCSI revision: 01 CCS
Jun 1 09:33:58 shonpc1 kernel: Detected scsi removable disk sde at scsi1, channel 0, id 6, lun 0
Jun 1 09:33:58 shonpc1 kernel: scsi : detected 1 SCSI tape 5 SCSI disks total.
Jun 1 09:33:58 shonpc1 kernel: SCSI device sda: hdwr sector= 512 bytes. Sectors= 2766300 [1350 MB] [1.4 GB]
Jun 1 09:33:58 shonpc1 kernel: SCSI device sdb: hdwr sector= 512 bytes. Sectors= 2134305 [1042 MB] [1.0 GB]
Jun 1 09:33:58 shonpc1 kernel: SCSI device sdc: hdwr sector= 512 bytes. Sectors= 86700 [42 MB] [0.0 GB]
Jun 1 09:33:58 shonpc1 kernel: sdc: Write Protect is off
Jun 1 09:33:58 shonpc1 kernel: SCSI device sdd: hdwr sector= 512 bytes. Sectors= 2054864 [1003 MB] [1.0 GB]
Jun 1 09:33:58 shonpc1 kernel: SCSI device sde: hdwr sector= 512 bytes. Sectors= 86700 [42 MB] [0.0 GB]
Jun 1 09:33:58 shonpc1 kernel: sde: Write Protect is off
Jun 1 09:33:58 shonpc1 kernel: eth0: 3Com 3c905 Boomerang 100baseTx at 0xecc0, 00:c0:4f:a3:12:cd, IRQ 19
Jun 1 09:33:58 shonpc1 kernel: 8K word-wide RAM 3:5 Rx:Tx split, autoselect/MII interface.
Jun 1 09:33:58 shonpc1 kernel: eth0: MII transceiver found at address 24.
Jun 1 09:33:58 shonpc1 kernel: Enabling bus-master transmits and whole-frame receives.
Jun 1 09:33:58 shonpc1 kernel: 3c59x.c:v0.47H 12/4/97 Donald Becker http://cesdis.gsfc.nasa.gov/linux/drivers/vortex.html
Jun 1 09:33:58 shonpc1 kernel: Partition check:
Jun 1 09:33:58 shonpc1 kernel: sda: sda1
Jun 1 09:33:58 shonpc1 kernel: sdb: sdb1
Jun 1 09:33:58 shonpc1 kernel: sdc:Dev 08:20 Sun disklabel: bad magic 0000
Jun 1 09:33:58 shonpc1 kernel: unknown partition table
Jun 1 09:33:58 shonpc1 kernel: sdd: sdd1
Jun 1 09:33:58 shonpc1 kernel: sde:Dev 08:40 Sun disklabel: bad magic ffff
Jun 1 09:33:58 shonpc1 kernel: unknown partition table
Jun 1 09:33:58 shonpc1 kernel: hda: hda1 hda2 hda3 hda4
Jun 1 09:33:58 shonpc1 kernel: hdb: hdb1 hdb2
Jun 1 09:33:58 shonpc1 kernel: VFS: Mounted root (ext2 filesystem) readonly.
Jun 1 09:33:58 shonpc1 kernel: Freeing unused kernel memory: 40k freed
Jun 1 09:33:58 shonpc1 kernel: Adding Swap: 96384k swap-space (priority -1)
Jun 1 09:33:58 shonpc1 kernel: EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
Jun 1 09:33:58 shonpc1 last message repeated 2 times
Jun 1 09:34:49 shonpc1 kernel: REGISTER_DEV sdc to md0 done
Jun 1 09:34:49 shonpc1 kernel: REGISTER_DEV sde to md0 done
Jun 1 09:34:49 shonpc1 kernel: raid0 : Allocating 8 bytes for hash.
Jun 1 10:30:49 shonpc1 kernel: Linux version 2.1.103 (root@shonpc1) (gcc version 2.7.2.3) #4 SMP Fri May 29 14:12:16 EDT 1998
Jun 1 10:30:49 shonpc1 kernel: Intel MultiProcessor Specification v1.4
Jun 1 10:30:49 shonpc1 kernel: Virtual Wire compatibility mode.
Jun 1 10:30:49 shonpc1 kernel: OEM ID: DELL Product ID: WS 400 APIC at: 0xFEE00000
Jun 1 10:30:49 shonpc1 kernel: Processor #0 Pentium(tm) Pro APIC version 17
Jun 1 10:30:49 shonpc1 kernel: Processor #1 Pentium(tm) Pro APIC version 17
Jun 1 10:30:49 shonpc1 kernel: I/O APIC #2 Version 17 at 0xFEC00000.
This is the oops sent through ksymoops....
Using `System.map' to map addresses to symbols.
>>EIP: c01fae39 <do_sd_request+ed/19c>
Trace: c01faf13 <requeue_sd_request+2b/1120>
Trace: c01dbfb1 <add_timer_randomness+181/18c>
Trace: c01faf13 <requeue_sd_request+2b/1120>
Trace: c01dc05e <add_blkdev_randomness+42/48>
Trace: c01dbfb1 <add_timer_randomness+181/18c>
Trace: c01dc05e <add_blkdev_randomness+42/48>
Trace: c01fa3d6 <end_scsi_request+12e/138>
Trace: c01faa35 <rw_intr+39d/6b4>
Trace: c01faa4d <rw_intr+3b5/6b4>
Trace: c01f28b9 <scsi_delete_timer+19/54>
Trace: c01f48dc <scsi_old_done+548/554>
Trace: c01f28b9 <scsi_delete_timer+19/54>
Trace: c0201e8b <aha152x_done+a7/d8>
Trace: c020244d <aha152x_intr+591/18e0>
Trace: c0107f64 <this_must_match_init_task+1f64/2000>
Trace: c0201e8b <aha152x_done+a7/d8>
Trace: c02030b4 <aha152x_intr+11f8/18e0>
Trace: c0107fa0 <this_must_match_init_task+1fa0/2000>
Trace: c020c1c5 <uart401intr+19/2c>
Trace: c0107f50 <this_must_match_init_task+1f50/2000>
Trace: c010cbc5 <handle_IRQ_event+35/58>
Trace: c0107f64 <this_must_match_init_task+1f64/2000>
Trace: c010ced7 <do_edge_ioapic_IRQ+93/100>
Trace: c0107f64 <this_must_match_init_task+1f64/2000>
Trace: c0107f64 <this_must_match_init_task+1f64/2000>
Trace: c0106000 <init_task_union>
Trace: c0107f5c <this_must_match_init_task+1f5c/2000>
Trace: c010d100 <do_IRQ+38/58>
Trace: c0107f64 <this_must_match_init_task+1f64/2000>
Trace: c0106000 <init_task_union>
Trace: c0107fcc <this_must_match_init_task+1fcc/2000>
Trace: c010b030 <ret_from_intr>
Trace: c0106000 <init_task_union>
Trace: c0106000 <init_task_union>
Trace: c0106000 <init_task_union>
Trace: c0107fcc <this_must_match_init_task+1fcc/2000>
Trace: c0100018 <startup_32+18/b4>
Trace: c0100018 <startup_32+18/b4>
Trace: c0114c39 <schedule+311/358>
Trace: c0107fe0 <this_must_match_init_task+1fe0/2000>
Trace: c0106000 <init_task_union>
Trace: c010937c <cpu_idle+40/120>
Trace: c0109454 <cpu_idle+118/120>
Trace: c0106000 <init_task_union>
Trace: c01001c5 <L6>
Code: c01fae39 <do_sd_request+ed/19c>
Code: c01fae39 <do_sd_request+ed/19c> 8a 40 04 movb 0x4(%eax),%al
Code: c01fae3c <do_sd_request+f0/19c> c1 e8 04 shrl $0x4,%eax
Code: c01fae3f <do_sd_request+f3/19c> 83 e0 0f andl $0xf,%eax
Code: c01fae42 <do_sd_request+f6/19c> 8b 15 b0 a3 25 movl 0xc025a3b0,%edx
Code: c01fae4e <do_sd_request+102/19c> 8d 04 80 leal (%eax,%eax,4),%eax
Code: c01fae51 <do_sd_request+105/19c> 8b 44 00 90 movl 0xffffff90(%eax,%eax,1),%eax
Code: c01fae5b <do_sd_request+10f/19c> 90 nop
Code: c01fae5c <do_sd_request+110/19c> 90 nop
This is the Oops itself....
page fault from irq handler: 0000
CPU: 0
EIP: 0010:[<c01fae39>]
EFLAGS: 00010046
eax: 00000000 ebx: c008fd20 ecx: c008ce00 edx: c03cd920
esi: c008ca00 edi: 00000001 ebp: 00000000 esp: c0107d0c
ds: 0018 es: 018 ss: 018
Process swapper (pid: 0, process nr: 0, stackpage=c0107000)
Stack: 00000000 00000000 c008ca00 00000000 c01faf13 00000000 c008ca00 00000000
00000000 c01dbfb1 00000008 7cfcd6c7 c0291a40 00000207 00000001 8b4e7b28
00000000 c008ca00 00000000 c01faf13 00000000 c008ca00 00000000 00000000
Call Trace: [<c01faf13>] [<c01dbfb1>] [<c01faf13>] [<c01dc05e>]
[<c01dbfb1>] [<c01dc05e>] [<c01fa3d6>]
[<c01faa35>] [<c01faa4d>] [<c01f28b9>] [<c01f48dc>] [<c01f28b9>]
[<c0201e8b>] [<c020244d>] [<c0107f64>]
[<c0201e8b>] [<c02030b4>] [<c0107fa0>] [<c020c1c5>] [<c0107f50>]
[<c010cbc5>] [<c0107f64>] [<c010ced7>]
[<c0107f64>] [<c0107f64>] [<c0106000>] [<c0107f5c>] [<c010d100>]
[<c0107f64>] [<c0106000>] [<c0107fcc>]
[<c010b030>] [<c0106000>] [<c0106000>] [<c0106000>] [<c0107fcc>]
[<c0100018>] [<c0100018>] [<c0114c39>]
[<c0107fe0>] [<c0106000>] [<c010937c>] [<c0109454>] [<c0106000>]
[<c01001c5>]
Code: 8a 40 04 c1 e8 04 83 e0 0f 8b 15 b0 a3 25 c0 8d 04 80 8b 44
Aiee, killing interrupt handler
Kernel panic: Attemped to kill the idle task!
In swapper task - not syncing
This is my .configure | grep y ...
# Automatically generated make config: don't edit
# Code maturity level options
CONFIG_EXPERIMENTAL=y
# Processor type and features
CONFIG_M686=y
CONFIG_MTRR=y
CONFIG_NET=y
CONFIG_PCI=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_OLD_PROC=y
CONFIG_SYSVIPC=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_SYSCTL=y
CONFIG_BINFMT_AOUT=y
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=y
# Plug and Play support
CONFIG_PNP=y
CONFIG_BLK_DEV_FD=y
CONFIG_BLK_DEV_IDE=y
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_BLK_DEV_IDEDMA=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_STRIPED=y
CONFIG_MD_RAID5=y
CONFIG_PARIDE_PARPORT=y
CONFIG_PACKET=y
CONFIG_NETLINK=y
CONFIG_RTNETLINK=y
CONFIG_NETLINK_DEV=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ALIAS=y
CONFIG_SYN_COOKIES=y
CONFIG_IP_NOSR=y
CONFIG_SKB_LARGE=y
CONFIG_IPX=y
CONFIG_SPX=y
CONFIG_ATALK=y
CONFIG_SCSI=y
# SCSI support type (disk, tape, CD-ROM)
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=y
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_AHA152X=y
CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
CONFIG_NET_VENDOR_3COM=y
CONFIG_VORTEX=y
# ISDN subsystem
# Filesystems
CONFIG_QUOTA=y
CONFIG_MINIX_FS=y
CONFIG_EXT2_FS=y
CONFIG_ISO9660_FS=y
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_PROC_FS=y
CONFIG_NFS_FS=y
CONFIG_NFSD=y
CONFIG_SUNRPC=y
CONFIG_LOCKD=y
CONFIG_SMB_FS=y
CONFIG_SMB_WIN95=y
CONFIG_NCP_FS=y
CONFIG_NCPFS_PACKET_SIGNING=y
CONFIG_NCPFS_IOCTL_LOCKING=y
CONFIG_NCPFS_STRONG=y
CONFIG_NCPFS_NFS_NS=y
CONFIG_NCPFS_OS2_NS=y
CONFIG_NCPFS_MOUNT_SUBDIR=y
CONFIG_HFS_FS=y
CONFIG_UFS_FS=y
CONFIG_BSD_DISKLABEL=y
CONFIG_SMD_DISKLABEL=y
CONFIG_MAC_PARTITION=y
CONFIG_NLS=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_SERIAL=y
CONFIG_MOUSE=y
CONFIG_PSMOUSE=y
CONFIG_WATCHDOG=y
CONFIG_SOFT_WATCHDOG=y
CONFIG_RTC=y
# Ftape, the floppy tape device driver
CONFIG_SOUND=y
CONFIG_SOUND_CS4232=y
CONFIG_SOUND_YM3812=y
CONFIG_VGA_CONSOLE=y
============================================================================
===
MPTable, version 2.0.12
----------------------------------------------------------------------------
---MP Floating Pointer Structure:
location: BIOS physical address: 0x000fe710 signature: '_MP_' length: 16 bytes version: 1.4 checksum: 0x91 mode: Virtual Wire
----------------------------------------------------------------------------
---MP Config Table Header:
physical address: 0x000f0000 signature: 'PCMP' base table length: 428 version: 1.4 checksum: 0x58 OEM ID: 'DELL ' Product ID: 'WS 400 ' OEM table pointer: 0x00000000 OEM table size: 0 entry count: 45 local APIC address: 0xfee00000 extended table length: 0 extended table checksum: 0
----------------------------------------------------------------------------
---MP Config Base Table Entries:
-- Processors: APIC ID Version State Family Model Step Flags 0 0x11 BSP, usable 6 3 4 0x80fbff 1 0x11 AP, usable 6 3 4 0x80fbff-- Bus: Bus ID Type 0 PCI 1 PCI 2 ISA-- I/O APICs: APIC ID Version State Address 2 0x11 usable 0xfec00000-- I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID I NT# ExtINT active-hi edge 2 0 2 0 INT conforms conforms 2 1 2 1 INT conforms conforms 2 3 2 3 INT conforms conforms 2 4 2 4 INT conforms conforms 2 5 2 5 INT conforms conforms 2 6 2 6 INT conforms conforms 2 7 2 7 INT conforms conforms 2 8 2 8 INT conforms conforms 2 9 2 9 INT conforms conforms 2 10 2 10 INT conforms conforms 2 11 2 11 INT conforms conforms 2 12 2 12 INT conforms conforms 2 13 2 13 INT conforms conforms 2 14 2 14 INT conforms conforms 0 16:A 2 16 INT conforms conforms 0 17:D 2 16 INT conforms conforms 1 9:B 2 16 INT conforms conforms 1 10:C 2 16 INT conforms conforms 1 11:C 2 16 INT conforms conforms 0 16:B 2 17 INT conforms conforms 0 17:A 2 17 INT conforms conforms 1 9:C 2 17 INT conforms conforms 1 10:D 2 17 INT conforms conforms 1 11:D 2 17 INT conforms conforms 0 16:C 2 18 INT conforms conforms 0 17:B 2 18 INT conforms conforms 1 9:D 2 18 INT conforms conforms 1 10:A 2 18 INT conforms conforms 1 11:A 2 18 INT conforms conforms 0 13:D 2 19 INT conforms conforms 0 16:D 2 19 INT conforms conforms 0 17:C 2 19 INT conforms conforms 1 8:A 2 19 INT conforms conforms 1 9:A 2 19 INT conforms conforms 1 10:B 2 19 INT conforms conforms 1 11:B 2 19 INT conforms conforms 2 15 2 20-- Local Ints: Type Polarity Trigger Bus ID IRQ APIC IDtINT# ExtINT active-hi edge 2 0 255 0 NMI active-hi edge 2 0 255 1----------------------------------------------------------------------------
---dmesg output:
6,P0) -> 16 Starting kswapd v 1.5 Serial driver version 4.25 with enabled PS/2 auxiliary pointing device detected -- driver installed. Software Watchdog Timer: 0.05, timer margin: 60 sec Real Time Clock Driver v1.09 Sound initialization started <Crystal audio controller (CS4236)> at 0x530 irq 5 dma 0,3 <MPU-401 (UART) MIDI> at 0x330 irq 7 <Yamaha OPL3 FM> at 0x388 Sound initialization complete PIIX3: IDE controller on PCI bus 00 dev 69 PIIX3: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:pio hda: QUANTUM FIREBALL ST4.3A, ATA DISK drive hdb: Conner Peripherals 540MB - CFS540A, ATA DISK drive hdc: NEC CD-ROM DRIVE:288, ATAPI CDROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: QUANTUM FIREBALL ST4.3A, 4110MB w/81kB Cache, CHS=524/255/63, DMA hdb: Conner Peripherals 540MB - CFS540A, 516MB w/64kB Cache, CHS=525/32/63 hdc: ATAPI 24X CDROM drive, 128kB Cache Uniform CD-ROM driver Revision: 2.12 Floppy drive(s): fd0 is 1.44M FDC 0 is a National Semiconductor PC87306 md driver 0.36.6 MAX_MD_DEV=4, MAX_REAL=8 raid0 personality registered raid5 personality registered aha152x: BIOS test: passed, auto configuration: ok, detected 2 controller(s) aha152x0: vital data: PORTBASE=0x340, IRQ=10, SCSI ID=7, reconnect=enabled, parity=enabled, synchronous=disabled, delay=100, extended translation=disabled aha152x: trying software interrupt, ok. aha152x1: vital data: PORTBASE=0x140, IRQ=9, SCSI ID=7, reconnect=enabled, parity=enabled, synchronous=disabled, delay=100, extended translation=disabled aha152x: trying software interrupt, ok. scsi0 : Adaptec 152x SCSI driver; $Revision: 1.7 $ scsi1 : Adaptec 152x SCSI driver; $Revision: 1.7 $ scsi : 2 hosts. scsi : detected total. eth0: 3Com 3c905 Boomerang 100baseTx at 0xecc0, 00:c0:4f:a3:12:cd, IRQ 19 8K word-wide RAM 3:5 Rx:Tx split, autoselect/MII interface. eth0: MII transceiver found at address 24. Enabling bus-master transmits and whole-frame receives. 3c59x.c:v0.47H 12/4/97 Donald Becker http://cesdis.gsfc.nasa.gov/linux/drivers/vortex.html Partition check: hda: hda1 hda2 hda3 hda4 hdb: hdb1 hdb2 VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 40k freed Adding Swap: 96384k swap-space (priority -1) SO_BROADCAST: Fix your netatalk as it will break before 2.2 SO_BROADCAST: Fix your netatalk as it will break before 2.2 SO_BROADCAST: Fix your netatalk as it will break before 2.2 SO_BROADCAST: Fix your netatalk as it will break before 2.2 SO_BROADCAST: Fix your netatalk as it will break before 2.2 SO_BROADCAST: Fix your netatalk as it will break before 2.2 SO_BROADCAST: Fix your netatalk as it will break before 2.2 SO_BROADCAST: Fix your netatalk as it will break before 2.2 SO_BROADCAST: Fix your netatalk as it will break before 2.2 md_add(): zero device size, huh, bailing out. md_add(): zero device size, huh, bailing out. SO_BROADCAST: Fix your netatalk as it will break before 2.2 SO_BROADCAST: Fix your netatalk as it will break before 2.2 SO_BROADCAST: Fix your netatalk as it will break before 2.2 SO_BROADCAST: Fix your netatalk as it will break before 2.2 cat uses obsolete /proc/pci interface SO_BROADCAST: Fix your netatalk as it will break before 2.2 SO_BROADCAST: Fix your netatalk as it will break before 2.2 SO_BROADCAST: Fix your netatalk as it will break before 2.2 SO_BROADCAST: Fix your netatalk as it will break before 2.2 SO_BROADCAST: Fix your netatalk as it will break before 2.2 SO_BROADCAST: Fix your netatalk as it will break before 2.2 SO_BROADCAST: Fix your netatalk as it will break before 2.2 SO_BROADCAST: Fix your netatalk as it will break before 2.2 SO_BROADCAST: Fix your netatalk as it will break before 2.2 SO_BROADCAST: Fix your netatalk as it will break before 2.2
--------------- scanpci output:
PCI says configuration type 1
PCI probing configuration type 1 Probing for devices on PCI bus 0:
pci bus 0x0 cardnum 0x00 function 0x0000: vendor 0x8086 device 0x1237 Intel Device unknown
pci bus 0x0 cardnum 0x0d function 0x0000: vendor 0x8086 device 0x7000 Intel 82371 pci-isa bridge
pci bus 0x0 cardnum 0x0d function 0x0001: vendor 0x8086 device 0x7010 Intel 82371 bus-master IDE controller
pci bus 0x0 cardnum 0x0e function 0x0000: vendor 0x1011 device 0x0024 Digital Equipment Corporation DC21152
pci bus 0x0 cardnum 0x10 function 0x0000: vendor 0x102b device 0x051b Matrox MGA Millennium II Probing for devices on PCI bus 1:
pci bus 0x1 cardnum 0x08 function 0x0000: vendor 0x10b7 device 0x9050 3COM 3C905 100bTX
----------------- /proc/pci output:
PCI devices found: Bus 0, device 0, function 0: Host bridge: Intel 82441FX Natoma (rev 2). Medium devsel. Fast back-to-back capable. Master Capable. Latency=32. Bus 0, device 13, function 0: ISA bridge: Intel 82371SB PIIX3 ISA (rev 1). Medium devsel. Fast back-to-back capable. Master Capable. No bursts. Bus 0, device 13, function 1: IDE interface: Intel 82371SB PIIX3 IDE (rev 0). Medium devsel. Fast back-to-back capable. Master Capable. Latency=32. I/O at 0xffa0 [0xffa1]. Bus 0, device 14, function 0: PCI bridge: DEC DC21152 (rev 2). Medium devsel. Fast back-to-back capable. Master Capable. Latency=32. Min Gnt=2. Bus 1, device 8, function 0: Ethernet controller: 3Com 3C905 100bTX (rev 0). Medium devsel. IRQ 13. Master Capable. Latency=32. Min Gnt=3.Max Lat=8. I/O at 0xecc0 [0xecc1]. Bus 0, device 16, function 0: VGA compatible controller: Matrox Millennium II (rev 0). Medium devsel. Fast back-to-back capable. IRQ 10. Master Capable. Latency=32. Prefetchable 32 bit memory at 0xfa000000 [0xfa000008]. Non-prefetchable 32 bit memory at 0xfe800000 [0xfe800000]. Non-prefetchable 32 bit memory at 0xfe000000 [0xfe000000].
------------------------ /proc/interrupts output:
CPU0 CPU1 0: 211788 356 XT-PIC timer 1: 5845 5659 IO-APIC-edge keyboard 2: 0 0 XT-PIC cascade 5: 0 0 IO-APIC-edge Crystal audio controller 7: 166559 166962 IO-APIC-edge MPU-401 UART 8: 1 0 IO-APIC-edge rtc 9: 6 9 IO-APIC-edge aha152x 10: 1 14 IO-APIC-edge aha152x 12: 6208 5898 IO-APIC-edge PS/2 Mouse 13: 1 0 XT-PIC fpu 14: 35221 20848 IO-APIC-edge ide0 15: 4 2 IO-APIC-edge ide1 19: 99871 99877 IO-APIC-level 3c905 Boomerang 100baseTx NMI: 0 IPI: 0
============================================================================ ===
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu