I'd like to put in a hearty 'me too' to this. 2.1.98 works just hunky dory
for me (including floppy access) for
12:06pm up 18:37, 2 users, load average: 0.01, 0.02, 0.00
Linux version 2.1.98 (root@neko) (gcc version 2.8.1) #17 Fri Apr 24 15:01:47 EDT 1998
PIIX: IDE controller on PCI bus 00 dev 39
PIIX: not 100% native mode: will probe irqs later
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: WDC AC36400L, 6149MB w/256kB Cache, CHS=13328/15/63, DMA
hdc: WDC AC36400L, 6149MB w/256kB Cache, CHS=13328/15/63, DMA
hdd: Seagate Technology 1275MB - ST31276A, 1221MB w/0kB Cache, CHS=2482/16/63
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
md driver 0.36.6 MAX_MD_DEV=4, MAX_REAL=8
md: starting 4 kernel threads
eth0: 3c509 at 0x300 tag 1, 10baseT port, address 00 a0 24 18 f6 f1, IRQ 10.
3c509.c:1.07 6/15/95 becker@cesdis.gsfc.nasa.gov
And a BusLogic 946C running as a module with a
Attached devices:
Host: scsi0 Channel: 00 Id: 04 Lun: 00
Vendor: TECMAR Model: TRAVAN NS8 Rev: P611
Type: Sequential-Access ANSI SCSI revision: 02
00:00.0 Host bridge: Intel Corporation 430FX - 82437FX TSC [Triton I] (rev 02)
00:07.0 ISA bridge: Intel Corporation 82371FB PIIX ISA [Triton I] (rev 02)
00:07.1 IDE interface: Intel Corporation 82371FB PIIX IDE [Triton I] (rev 02)
00:09.0 VGA compatible controller: S3 Inc. 86C325 [ViRGE] (rev 06)
00:0b.0 SCSI storage controller: BusLogic BT-946C (BA80C30) [MultiMaster 10]
___________________________________________________________________________
simple is elegant mrnick.binary9.net nicholas@binary9.net
___________________________________________________________________________
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu