> This is for 2.0.27.
>
> I'm using a kernel with some special hardware (a NCR-based framegrabber
> card), which I don't want autodetected. Therefore, I put
> append="reserve=0x6000" into my /etc/lilo.conf. AFAIK, this should
> disable autodetection of the hardware in that area. However, this
> does not work:
>
> $ cat /proc/cmdline
> auto BOOT_IMAGE=Linux ro root=812 reserver=0x6000
^
Your problem is right here: |
LLaP
bero