> Hi. I'm trying to run the 2.0.18 kernel, and having boot problems with a
> 2940UW scsi controller. The 2.0.10 kernel ran w/no problems, and the RedHat
> Colgate install disk also ran w/no problems, which I think is a 2.0.18 kernel.
> However, the installed .18 kernel fails, as follows:
>
> scsi: 0 hosts
> scsi: detected total
Are you sure the kernel has compiled-in SCSI and AHA-2940 support? If
you're trying to boot from it, you'll need them compiled in, not as
modules.
LLaP
bero