[PATCH v1 1/2] Revert "gpio: mlxbf3: only get IRQ for device instance 0"

[David Thompson]

This reverts commit 10af0273a35ab4513ca1546644b8c853044da134.

While this change was merged, it is not the preferred solution.
During review of a similar change to the gpio-mlxbf2 driver, the
use of "platform_get_irq_optional" was identified as the preferred
solution, so let's use it for gpio-mlxbf3 driver as well.

Cc: stable@xxxxxxxxxxxxxxx
Fixes: 10af0273a35a ("gpio: mlxbf3: only get IRQ for device instance 0")
Signed-off-by: David Thompson <davthompson@xxxxxxxxxx>
---
 drivers/gpio/gpio-mlxbf3.c | 54 ++++++++++++++------------------------
 1 file changed, 19 insertions(+), 35 deletions(-)

diff --git a/drivers/gpio/gpio-mlxbf3.c b/drivers/gpio/gpio-mlxbf3.c
index 9875e34bde72..10ea71273c89 100644
--- a/drivers/gpio/gpio-mlxbf3.c
+++ b/drivers/gpio/gpio-mlxbf3.c
@@ -190,9 +190,7 @@ static int mlxbf3_gpio_probe(struct platform_device *pdev)
 	struct mlxbf3_gpio_context *gs;
 	struct gpio_irq_chip *girq;
 	struct gpio_chip *gc;
-	char *colon_ptr;
 	int ret, irq;
-	long num;
 
 	gs = devm_kzalloc(dev, sizeof(*gs), GFP_KERNEL);
 	if (!gs)
@@ -229,39 +227,25 @@ static int mlxbf3_gpio_probe(struct platform_device *pdev)
 	gc->owner = THIS_MODULE;
 	gc->add_pin_ranges = mlxbf3_gpio_add_pin_ranges;
 
-	colon_ptr = strchr(dev_name(dev), ':');
-	if (!colon_ptr) {
-		dev_err(dev, "invalid device name format\n");
-		return -EINVAL;
-	}
-
-	ret = kstrtol(++colon_ptr, 16, &num);
-	if (ret) {
-		dev_err(dev, "invalid device instance\n");
-		return ret;
-	}
-
-	if (!num) {
-		irq = platform_get_irq(pdev, 0);
-		if (irq >= 0) {
-			girq = &gs->gc.irq;
-			gpio_irq_chip_set_chip(girq, &gpio_mlxbf3_irqchip);
-			girq->default_type = IRQ_TYPE_NONE;
-			/* This will let us handle the parent IRQ in the driver */
-			girq->num_parents = 0;
-			girq->parents = NULL;
-			girq->parent_handler = NULL;
-			girq->handler = handle_bad_irq;
-
-			/*
-			 * Directly request the irq here instead of passing
-			 * a flow-handler because the irq is shared.
-			 */
-			ret = devm_request_irq(dev, irq, mlxbf3_gpio_irq_handler,
-					       IRQF_SHARED, dev_name(dev), gs);
-			if (ret)
-				return dev_err_probe(dev, ret, "failed to request IRQ");
-		}
+	irq = platform_get_irq(pdev, 0);
+	if (irq >= 0) {
+		girq = &gs->gc.irq;
+		gpio_irq_chip_set_chip(girq, &gpio_mlxbf3_irqchip);
+		girq->default_type = IRQ_TYPE_NONE;
+		/* This will let us handle the parent IRQ in the driver */
+		girq->num_parents = 0;
+		girq->parents = NULL;
+		girq->parent_handler = NULL;
+		girq->handler = handle_bad_irq;
+
+		/*
+		 * Directly request the irq here instead of passing
+		 * a flow-handler because the irq is shared.
+		 */
+		ret = devm_request_irq(dev, irq, mlxbf3_gpio_irq_handler,
+				       IRQF_SHARED, dev_name(dev), gs);
+		if (ret)
+			return dev_err_probe(dev, ret, "failed to request IRQ");
 	}
 
 	platform_set_drvdata(pdev, gs);
-- 
2.43.2