[PATCH net] net: mdio_bus: Use devm for getting reset GPIO

[Bence Csókás]

Commit bafbdd527d56 ("phylib: Add device reset GPIO support") removed
devm_gpiod_get_optional() in favor of the non-devres managed
fwnode_get_named_gpiod(). When it was kind-of reverted by commit
40ba6a12a548 ("net: mdio: switch to using gpiod_get_optional()"), the devm
functionality was not reinstated. Nor was the GPIO unclaimed on device
remove. This leads to the GPIO being claimed indefinitely, even when the
device and/or the driver gets removed.

Fixes: bafbdd527d56 ("phylib: Add device reset GPIO support")
Fixes: 40ba6a12a548 ("net: mdio: switch to using gpiod_get_optional()")
Cc: Csaba Buday <buday.csaba@xxxxxxxxx>
Signed-off-by: Bence Csókás <csokas.bence@xxxxxxxxx>
---
 drivers/net/phy/mdio_bus.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c
index fda2e27c1810..24bdab5bdd24 100644
--- a/drivers/net/phy/mdio_bus.c
+++ b/drivers/net/phy/mdio_bus.c
@@ -36,8 +36,8 @@
 static int mdiobus_register_gpiod(struct mdio_device *mdiodev)
 {
 	/* Deassert the optional reset signal */
-	mdiodev->reset_gpio = gpiod_get_optional(&mdiodev->dev,
-						 "reset", GPIOD_OUT_LOW);
+	mdiodev->reset_gpio = devm_gpiod_get_optional(&mdiodev->dev,
+						      "reset", GPIOD_OUT_LOW);
 	if (IS_ERR(mdiodev->reset_gpio))
 		return PTR_ERR(mdiodev->reset_gpio);
 

base-commit: fa582ca7e187a15e772e6a72fe035f649b387a60
-- 
2.43.0