Re: [PATCH v2 1/3] clk: renesas: r9a09g047: Add clock and reset signals for the GBETH IPs

[Geert Uytterhoeven]

Hi John,

On Mon, 30 Jun 2025 at 18:23, John Madieu <john.madieu.xa@xxxxxxxxxxxxxx> wrote:
> > From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
> > On Thu, 19 Jun 2025 at 10:22, Lad, Prabhakar <prabhakar.csengg@xxxxxxxxx>
> > wrote:
> > > On Thu, Jun 19, 2025 at 5:34 AM John Madieu
> > > <john.madieu.xa@xxxxxxxxxxxxxx> wrote:
> > > > > From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx> On Wed, 18 Jun
> > > > > 2025 at 12:04, John Madieu <john.madieu.xa@xxxxxxxxxxxxxx>
> > > > > wrote:
> > > > > > > From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx> On Wed, 11 Jun
> > > > > > > 2025 at 11:02, John Madieu <john.madieu.xa@xxxxxxxxxxxxxx>
> > > > > > > wrote:
> > > > > > > > Add clock and reset entries for the Gigabit Ethernet
> > > > > > > > Interfaces (GBETH
> > > > > > > > 0-1) IPs found on the RZ/G3E SoC. This includes various
> > > > > > > > PLLs, dividers, and mux clocks needed by these two GBETH IPs.
> > > > > > > >
> > > > > > > > Reviewed-by: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
> > > > > > > > Tested-by: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
> > > > > > > > Signed-off-by: John Madieu <john.madieu.xa@xxxxxxxxxxxxxx>
> > > > > > >
> > > > > > > Thanks for your patch!
> > > > > > >
> > > > > > > > --- a/drivers/clk/renesas/r9a09g047-cpg.c
> > > > > > > > +++ b/drivers/clk/renesas/r9a09g047-cpg.c
> > >
> > > "The clock gating cells require source clocks to operate correctly. If
> > > the source clocks are stopped, these registers cannot be used."
> >
> > Has this been sorted out yet? I see no change or mention of it in v3.
>
> Yes, it has been sorted out. I mean they operated properly after
> all the tests, even after S2R/wakeup test.
>
> While at it, even with OEN patches applied, I could not reproduce
> the issue known to V2H. That's why I've asked if you'd prefer
> DEF_MOD_EXTERNAL instead of DEF_MOD (which does not work on V2H)
> for consistency with RZ/V2H, I can do that as well.

As DEF_MOD_MUX_EXTERNAL() better matches the undelying
hardware, I prefer that.
Thanks!

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds