[PATCH v4 0/3] arm64: dts: Add support for Ultratronik i.MX8MP Ultra-MACH SBC

[Goran Rađenović]

This patch series adds support for the Ultratronik i.MX8MP-based Ultra-MACH SBC.

The Ultra-MACH SBC is an industrial-grade single-board computer based on the NXP i.MX8M Plus SoC. This initial support includes:

- Updating the MAINTAINERS file to include the new board in the Ultratronik support section.
- Adding a compatible string entry for the board to `fsl.yaml` in device tree bindings.
- Introducing a new device tree source file `imx8mp-ultra-mach-sbc.dts` with basic hardware support.

This series is modeled after the support added for the STM32MP157C-based Ultra-FLY SBC and aims to follow the conventions used for other i.MX8MP boards in mainline..

Changes in v2:
  - Use `enum` with `const:` values in fsl.yaml to correctly represent multiple compatibles.
  - Updated SPI child node name to use the generic `nfc-transceiver` per DT naming conventions.
  - Renamed several peripheral nodes (`crypto@35`, `pmic@25`, etc.) to standard names.
  - Minor formatting cleanup and compliance fixes per review feedback.

Changes in v3:
- Added "ultratronik,imx8mp-ultra-mach-sbc" to the shared i.MX8MP enum block in `fsl.yaml` [1].
- Ensured the compatible entry is validated by the existing binding structure.
- Updated `imx8mp-ultra-mach-sbc.dts` to address review feedback from v2 [2], including:
  - Proper formatting and indentation fixes.
  - Cleaned up node ordering and property alignment.

Changes in v4:
  - Moved `status = "okay";` to the last property in the TPM node.
  - Fixed indentation of `cs-gpios` multi-line property in the ecspi2 node.
  - Removed an outdated comment.

No functional changes otherwise. Patch series is based on feedback from Frank Li and Krzysztof Kozlowski.

Thanks for the reviews!

Link to v2 DT binding discussion:
[1] https://lore.kernel.org/all/578ea477-c68c-4427-8013-550bf4f9c05b@xxxxxxxxxx/#t

Link to v2 DTS review:
[2] https://lore.kernel.org/all/aEmh7VL7BHkXp5Fu@lizhi-Precision-Tower-5810/

The board is based on NXP's i.MX8MP SoC and includes eMMC, LPDDR4, USB-C, Ethernet, and HDMI.

Tested with:
- `make ARCH=arm64 dtbs_check` (passes)
- Boot tested on hardware

Best regards,  
Goran Rađenović


Goran Rađenović (3):
  MAINTAINERS: Add i.MX8MP Ultra-MACH SBC to ULTRATRONIK BOARD SUPPORT
  dt-bindings: arm: imx8mp: Add Ultratronik Ultra-MACH SBC
  arm64: dts: imx8mp: Add initial support for Ultratronik
    imx8mp-ultra-mach-sbc board

 .../devicetree/bindings/arm/fsl.yaml          |   1 +
 MAINTAINERS                                   |   1 +
 arch/arm64/boot/dts/freescale/Makefile        |   1 +
 .../dts/freescale/imx8mp-ultra-mach-sbc.dts   | 908 ++++++++++++++++++
 4 files changed, 911 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-ultra-mach-sbc.dts


base-commit: 86731a2a651e58953fc949573895f2fa6d456841
-- 
2.43.0