Re: [PATCH v6 09/10] arm64: dts: cix: add initial CIX P1(SKY1) dts support

[Peter Chen]

On 25-04-17 08:18:44, Krzysztof Kozlowski wrote:
> EXTERNAL EMAIL
> 
> On 15/04/2025 09:27, Peter Chen wrote:
> > +
> > +             mbox_ap2pm: mailbox@6590080 {
> > +                     compatible = "cix,sky1-mbox";
> > +                     reg = <0x0 0x06590080 0x0 0xff80>;
> > +                     interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH 0>;
> > +                     #mbox-cells = <1>;
> > +                     cix,mbox-dir = "tx";
> > +             };
> > +
> > +             pm2ap_scmi_mem: pm2ap-shmem@65a0000 {
> > +                     compatible = "arm,scmi-shmem";
> > +                     #address-cells = <2>;
> > +                     #size-cells = <2>;
> > +                     reg-io-width = <4>;
> > +                     reg = <0x0 0x065a0000 0x0 0x80>;
> 
> Messed order of properties. Keep it consistent (see DTS conding style).
> Other nodes also have oddly placed reg.

Thanks for your reviewing, Krzysztof.

All the nodes mailbox and shmem (in mailbox) are on the same bus, so
I keep it by unit address in ascending order like DTS coding sytle
says. I think below rules are two options, isn't it?


1. Nodes on any bus, thus using unit addresses for children, shall be
   ordered by unit address in ascending order.
   Alternatively for some subarchitectures, nodes of the same type can be
   grouped together, e.g. all I2C controllers one after another even if this
   breaks unit address ordering.

> 
> 
> 
> Best regards,
> Krzysztof


-- 

Best regards,
Peter