Re: [PATCH 1/1] Reduce synchronize_rcu() waiting time

[Uladzislau Rezki]

On Tue, Mar 21, 2023 at 02:03:19PM +0000, Zhuo, Qiuxu wrote:
> > From: Uladzislau Rezki (Sony) <urezki@xxxxxxxxx>
> > Sent: Tuesday, March 21, 2023 6:28 PM
> > [...]
> > Subject: [PATCH 1/1] Reduce synchronize_rcu() waiting time
> > 
> > A call to a synchronize_rcu() can be expensive from time point of view.
> > Different workloads can be affected by this especially the ones which use this
> > API in its time critical sections.
> > 
> 
> This is interesting and meaningful research. ;-)
> 
> > For example in case of NOCB scenario the wakeme_after_rcu() callback
> > invocation depends on where in a nocb-list it is located. Below is an example
> > when it was the last out of ~3600 callbacks:
> > 
> > <snip>
> >   <...>-29      [001] d..1. 21950.145313: rcu_batch_start: rcu_preempt
> > CBs=3613 bl=28
> > ...
> >   <...>-29      [001] ..... 21950.152578: rcu_invoke_callback: rcu_preempt
> > rhp=00000000b2d6dee8 func=__free_vm_area_struct.cfi_jt
> >   <...>-29      [001] ..... 21950.152579: rcu_invoke_callback: rcu_preempt
> > rhp=00000000a446f607 func=__free_vm_area_struct.cfi_jt
> >   <...>-29      [001] ..... 21950.152580: rcu_invoke_callback: rcu_preempt
> > rhp=00000000a5cab03b func=__free_vm_area_struct.cfi_jt
> >   <...>-29      [001] ..... 21950.152581: rcu_invoke_callback: rcu_preempt
> > rhp=0000000013b7e5ee func=__free_vm_area_struct.cfi_jt
> >   <...>-29      [001] ..... 21950.152582: rcu_invoke_callback: rcu_preempt
> > rhp=000000000a8ca6f9 func=__free_vm_area_struct.cfi_jt
> >   <...>-29      [001] ..... 21950.152583: rcu_invoke_callback: rcu_preempt
> > rhp=000000008f162ca8 func=wakeme_after_rcu.cfi_jt
> >   <...>-29      [001] d..1. 21950.152625: rcu_batch_end: rcu_preempt CBs-
> > invoked=3612 idle=....
> > <snip>
> >
> 
> Did the results above tell us that CBs-invoked=3612 during the time 21950.145313 ~ 21950.152625?
> 
Yes.

>
> If possible, may I know the steps, commands, and related parameters to produce the results above?
> Thank you!
> 
Build the kernel with CONFIG_RCU_TRACE configuration. Update your "set_event"
file with appropriate traces:

<snip>
XQ-DQ54:/sys/kernel/tracing # echo rcu:rcu_batch_start rcu:rcu_batch_end rcu:rcu_invoke_callback > set_event

XQ-DQ54:/sys/kernel/tracing # cat set_event
rcu:rcu_batch_start
rcu:rcu_invoke_callback
rcu:rcu_batch_end
XQ-DQ54:/sys/kernel/tracing #
<snip>

Collect traces as much as you want: XQ-DQ54:/sys/kernel/tracing # echo 1 > tracing_on; sleep 10; echo 0 > tracing_on
Next problem is how to parse it. Of course you will not be able to parse
megabytes of traces. For that purpose i use a special C trace parser.
If you need an example please let me know i can show here.

--
Uladzislau Rezki