Re: [PATCH v2 1/3] dt-bindings: arm: optee: add interrupt controller properties

[Rob Herring]

+Sudeep

On Tue, Jan 24, 2023 at 11:56:41AM +0100, Etienne Carriere wrote:
> Adds an optional interrupt controller property to optee firmware node
> in the DT bindings. Optee driver may embeds an irqchip exposing
> interrupts notified by the TEE world. Optee registers up to 1 interrupt
> controller and identifies each line with a line number from 0 to
> UINT16_MAX.
> 
> In the example, the platform SCMI device uses optee interrupt irq 5
> as async signal to trigger processing of an async incoming SCMI message,
> in the scope of a CPU DVFS control. A platform can have several SCMI
> channels driven this way. Optee irqs also permits small embedded devices
> to share e.g. a gpio expander, a group of wakeup sources, etc... between
> OP-TEE world (for sensitive services) and Linux world (for non-sensitive
> services). The physical controller is driven from the TEE which exposes
> some controls to Linux kernel.
> 
> Cc: Jens Wiklander <jens.wiklander@xxxxxxxxxx>
> Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@xxxxxxxxxx>
> Cc: Marc Zyngier <maz@xxxxxxxxxx>
> Cc: Rob Herring <robh+dt@xxxxxxxxxx>
> Cc: Sumit Garg <sumit.garg@xxxxxxxxxx>
> 
> Co-developed-by: Pascal Paillet <p.paillet@xxxxxxxxxxx>
> Signed-off-by: Pascal Paillet <p.paillet@xxxxxxxxxxx>
> Signed-off-by: Etienne Carriere <etienne.carriere@xxxxxxxxxx>
> ---
> Changes since v1:
> - Added a description to #interrupt-cells property.
> - Changed of example. Linux wakeup event was subject to discussion and
>   i don't know much about input events in Linux. So move to SCMI.
>   In the example, an SCMI server in OP-TEE world raises optee irq 5
>   so that Linux scmi optee channel &scmi_cpu_dvfs pushed in the incoming
>   SCMI message in the scmi device for liekly later processing in threaded
>   context. The example includes all parties: optee, scmi, sram, gic.
> - Obviously rephrased the commit message.
> - Added Cc: tags
> ---
>  .../arm/firmware/linaro,optee-tz.yaml         | 67 +++++++++++++++++++
>  1 file changed, 67 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/arm/firmware/linaro,optee-tz.yaml b/Documentation/devicetree/bindings/arm/firmware/linaro,optee-tz.yaml
> index d4dc0749f9fd..9c00c27f8b2c 100644
> --- a/Documentation/devicetree/bindings/arm/firmware/linaro,optee-tz.yaml
> +++ b/Documentation/devicetree/bindings/arm/firmware/linaro,optee-tz.yaml
> @@ -40,6 +40,14 @@ properties:
>        HVC #0, register assignments
>        register assignments are specified in drivers/tee/optee/optee_smc.h
>  
> +  interrupt-controller: true
> +
> +  "#interrupt-cells":
> +    const: 1
> +    description: |
> +      OP-TEE exposes irq for irp chip controllers from OP-TEE world. Each
> +      irq is assigned a single line number identifier used as first argument.
> +
>  required:
>    - compatible
>    - method
> @@ -64,3 +72,62 @@ examples:
>              method = "hvc";
>          };
>      };
> +
> +  - |
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    firmware  {
> +        optee: optee {
> +            compatible = "linaro,optee-tz";
> +            method = "smc";
> +            interrupts = <GIC_SPI 187 IRQ_TYPE_EDGE_RISING>;
> +            interrupt-controller;
> +            #interrupt-cells = <1>;
> +        };
> +
> +        scmi {
> +            compatible = "linaro,scmi-optee";
> +            linaro,optee-channel-id = <0>;
> +            interrupt-parent = <&gic>;
> +            #address-cells = <1>;
> +            #size-cells = <0>;
> +
> +            scmi_cpu_dvfs: protocol@13 {
> +                reg = <0x13>;
> +                linaro,optee-channel-id = <1>;
> +                shmem = <&scmi_shm_tx>, <&scmi_shm_rx>;
> +                interrupts-extended = <&optee 5>;
> +                interrupt-names = "a2p";

These properties aren't documented. Soon there will be a warning[1]. 

> +                #clock-cells = <1>;
> +            };
> +        };
> +    };
> +
> +    gic: interrupt-controller@a0021000 {
> +        compatible = "arm,cortex-a7-gic";
> +        reg = <0xa0021000 0x1000>, <0xa0022000 0x2000>;
> +        interrupt-controller;
> +        #interrupt-cells = <3>;
> +    };
> +
> +    soc {
> +        #address-cells = <1>;
> +        #size-cells = <1>;
> +
> +        sram@2ffff000 {
> +            compatible = "mmio-sram";
> +            reg = <0x2ffff000 0x1000>;
> +            #address-cells = <1>;
> +            #size-cells = <1>;
> +            ranges = <0 0x2ffff000 0x1000>;
> +
> +            scmi_shm_tx: scmi-sram@0 {
> +                compatible = "arm,scmi-shmem";
> +                reg = <0 0x80>;
> +            };
> +
> +            scmi_shm_rx: scmi-sram@100 {
> +                compatible = "arm,scmi-shmem";
> +                reg = <0x100 0x80>;
> +            };

There's no need to show providers in examples (unless the example is for 
the provider).

Rob