Re: [PATCH v3 6/7] riscv: dts: starfive: Add initial StarFive JH7110 device tree

From: Conor Dooley
Date: Tue Dec 20 2022 - 16:31:59 EST


On Tue, Dec 20, 2022 at 09:12:46AM +0800, Hal Feng wrote:
> From: Emil Renner Berthing <kernel@xxxxxxxx>
>
> Add initial device tree for the JH7110 RISC-V SoC by StarFive
> Technology Ltd.
>
> Signed-off-by: Emil Renner Berthing <kernel@xxxxxxxx>
> Co-developed-by: Jianlong Huang <jianlong.huang@xxxxxxxxxxxxxxxx>
> Signed-off-by: Jianlong Huang <jianlong.huang@xxxxxxxxxxxxxxxx>
> Co-developed-by: Hal Feng <hal.feng@xxxxxxxxxxxxxxxx>
> Signed-off-by: Hal Feng <hal.feng@xxxxxxxxxxxxxxxx>
> ---

FWIW, this cpu-map is now the default in linux, so you no longer *need*
to add it for that purpose - but there's obviously no harm in being
explicit for other operating systems etc. (IOW, don't remove it!)

> + cpu-map {
> + cluster0 {
> + core0 {
> + cpu = <&S76_0>;
> + };
> +
> + core1 {
> + cpu = <&U74_1>;
> + };
> +
> + core2 {
> + cpu = <&U74_2>;
> + };
> +
> + core3 {
> + cpu = <&U74_3>;
> + };
> +
> + core4 {
> + cpu = <&U74_4>;
> + };
> + };
> + };
> + };

> + syscrg: clock-controller@13020000 {

For obvious reasons, I cannot apply this until both the clock & pinctrl
bindings are in my tree - but you know that already.

> + compatible = "starfive,jh7110-syscrg";
> + reg = <0x0 0x13020000 0x0 0x10000>;
> + clocks = <&osc>, <&gmac1_rmii_refin>,
> + <&gmac1_rgmii_rxin>,
> + <&i2stx_bclk_ext>, <&i2stx_lrck_ext>,
> + <&i2srx_bclk_ext>, <&i2srx_lrck_ext>,
> + <&tdm_ext>, <&mclk_ext>;

As Krzk asked - are these clocks really all inputs to the SoC?

> + clock-names = "osc", "gmac1_rmii_refin",
> + "gmac1_rgmii_rxin",
> + "i2stx_bclk_ext", "i2stx_lrck_ext",
> + "i2srx_bclk_ext", "i2srx_lrck_ext",
> + "tdm_ext", "mclk_ext";
> + #clock-cells = <1>;
> + #reset-cells = <1>;
> + };
> +
> + gpio: gpio@13040000 {

> + gpioa: gpio@17020000 {

Out of curiousity, why gpio & gpioa?

Thanks,
Conor.

Attachment: signature.asc
Description: PGP signature