Re: [PATCH v3 6/7] riscv: dts: starfive: Add initial StarFive JH7110 device tree

From: Krzysztof Kozlowski
Date: Tue Dec 20 2022 - 05:10:23 EST


On 20/12/2022 02:12, Hal Feng wrote:
> From: Emil Renner Berthing <kernel@xxxxxxxx>
>
> Add initial device tree for the JH7110 RISC-V SoC by StarFive
> Technology Ltd.
>
> Signed-off-by: Emil Renner Berthing <kernel@xxxxxxxx>
> Co-developed-by: Jianlong Huang <jianlong.huang@xxxxxxxxxxxxxxxx>
> Signed-off-by: Jianlong Huang <jianlong.huang@xxxxxxxxxxxxxxxx>
> Co-developed-by: Hal Feng <hal.feng@xxxxxxxxxxxxxxxx>
> Signed-off-by: Hal Feng <hal.feng@xxxxxxxxxxxxxxxx>
> ---
> arch/riscv/boot/dts/starfive/jh7110.dtsi | 411 +++++++++++++++++++++++
> 1 file changed, 411 insertions(+)
> create mode 100644 arch/riscv/boot/dts/starfive/jh7110.dtsi
>
> diff --git a/arch/riscv/boot/dts/starfive/jh7110.dtsi b/arch/riscv/boot/dts/starfive/jh7110.dtsi
> new file mode 100644
> index 000000000000..64d260ea1f29
> --- /dev/null
> +++ b/arch/riscv/boot/dts/starfive/jh7110.dtsi
> @@ -0,0 +1,411 @@
> +// SPDX-License-Identifier: GPL-2.0 OR MIT
> +/*
> + * Copyright (C) 2022 StarFive Technology Co., Ltd.
> + * Copyright (C) 2022 Emil Renner Berthing <kernel@xxxxxxxx>
> + */
> +
> +/dts-v1/;
> +#include <dt-bindings/clock/starfive,jh7110-crg.h>
> +#include <dt-bindings/reset/starfive,jh7110-crg.h>
> +
> +/ {
> + compatible = "starfive,jh7110";
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + cpus {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + S76_0: cpu@0 {
> + compatible = "sifive,u74-mc", "riscv";
> + reg = <0>;
> + d-cache-block-size = <64>;
> + d-cache-sets = <64>;
> + d-cache-size = <8192>;
> + d-tlb-sets = <1>;
> + d-tlb-size = <40>;
> + device_type = "cpu";
> + i-cache-block-size = <64>;
> + i-cache-sets = <64>;
> + i-cache-size = <16384>;
> + i-tlb-sets = <1>;
> + i-tlb-size = <40>;
> + mmu-type = "riscv,sv39";
> + next-level-cache = <&ccache>;
> + riscv,isa = "rv64imac";
> + tlb-split;
> + status = "disabled";
> +
> + cpu0_intc: interrupt-controller {
> + compatible = "riscv,cpu-intc";
> + interrupt-controller;
> + #interrupt-cells = <1>;
> + };
> + };
> +
> + U74_1: cpu@1 {
> + compatible = "sifive,u74-mc", "riscv";
> + reg = <1>;
> + d-cache-block-size = <64>;
> + d-cache-sets = <64>;
> + d-cache-size = <32768>;
> + d-tlb-sets = <1>;
> + d-tlb-size = <40>;
> + device_type = "cpu";
> + i-cache-block-size = <64>;
> + i-cache-sets = <64>;
> + i-cache-size = <32768>;
> + i-tlb-sets = <1>;
> + i-tlb-size = <40>;
> + mmu-type = "riscv,sv39";
> + next-level-cache = <&ccache>;
> + riscv,isa = "rv64imafdc";
> + tlb-split;
> +
> + cpu1_intc: interrupt-controller {
> + compatible = "riscv,cpu-intc";
> + interrupt-controller;
> + #interrupt-cells = <1>;
> + };
> + };
> +
> + U74_2: cpu@2 {
> + compatible = "sifive,u74-mc", "riscv";
> + reg = <2>;
> + d-cache-block-size = <64>;
> + d-cache-sets = <64>;
> + d-cache-size = <32768>;
> + d-tlb-sets = <1>;
> + d-tlb-size = <40>;
> + device_type = "cpu";
> + i-cache-block-size = <64>;
> + i-cache-sets = <64>;
> + i-cache-size = <32768>;
> + i-tlb-sets = <1>;
> + i-tlb-size = <40>;
> + mmu-type = "riscv,sv39";
> + next-level-cache = <&ccache>;
> + riscv,isa = "rv64imafdc";
> + tlb-split;
> +
> + cpu2_intc: interrupt-controller {
> + compatible = "riscv,cpu-intc";
> + interrupt-controller;
> + #interrupt-cells = <1>;
> + };
> + };
> +
> + U74_3: cpu@3 {
> + compatible = "sifive,u74-mc", "riscv";
> + reg = <3>;
> + d-cache-block-size = <64>;
> + d-cache-sets = <64>;
> + d-cache-size = <32768>;
> + d-tlb-sets = <1>;
> + d-tlb-size = <40>;
> + device_type = "cpu";
> + i-cache-block-size = <64>;
> + i-cache-sets = <64>;
> + i-cache-size = <32768>;
> + i-tlb-sets = <1>;
> + i-tlb-size = <40>;
> + mmu-type = "riscv,sv39";
> + next-level-cache = <&ccache>;
> + riscv,isa = "rv64imafdc";
> + tlb-split;
> +
> + cpu3_intc: interrupt-controller {
> + compatible = "riscv,cpu-intc";
> + interrupt-controller;
> + #interrupt-cells = <1>;
> + };
> + };
> +
> + U74_4: cpu@4 {
> + compatible = "sifive,u74-mc", "riscv";
> + reg = <4>;
> + d-cache-block-size = <64>;
> + d-cache-sets = <64>;
> + d-cache-size = <32768>;
> + d-tlb-sets = <1>;
> + d-tlb-size = <40>;
> + device_type = "cpu";
> + i-cache-block-size = <64>;
> + i-cache-sets = <64>;
> + i-cache-size = <32768>;
> + i-tlb-sets = <1>;
> + i-tlb-size = <40>;
> + mmu-type = "riscv,sv39";
> + next-level-cache = <&ccache>;
> + riscv,isa = "rv64imafdc";
> + tlb-split;
> +
> + cpu4_intc: interrupt-controller {
> + compatible = "riscv,cpu-intc";
> + interrupt-controller;
> + #interrupt-cells = <1>;
> + };
> + };
> +
> + cpu-map {
> + cluster0 {
> + core0 {
> + cpu = <&S76_0>;
> + };
> +
> + core1 {
> + cpu = <&U74_1>;
> + };
> +
> + core2 {
> + cpu = <&U74_2>;
> + };
> +
> + core3 {
> + cpu = <&U74_3>;
> + };
> +
> + core4 {
> + cpu = <&U74_4>;
> + };
> + };
> + };
> + };
> +
> + osc: osc {

Node names should be generic, so why this is "osc" and other oscillators
are not "osc"?


> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + };
> +
> + rtc_osc: rtc_osc {

No underscores in node names. Generic node names (so each of them
starting or ending with clock).

> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + };
> +
> + gmac0_rmii_refin: gmac0_rmii_refin {

Same problem... and actually you have way too many fixed clocks which do
nothing. It looks like you avoid to define proper clock controller.
What's the point for all these clocks? These are no-op.

> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + };
> +
> + gmac0_rgmii_rxin: gmac0_rgmii_rxin {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + };
> +
> + gmac1_rmii_refin: gmac1_rmii_refin {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + };
> +
> + gmac1_rgmii_rxin: gmac1_rgmii_rxin {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + };
> +
> + i2stx_bclk_ext: i2stx_bclk_ext {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + };
> +
> + i2stx_lrck_ext: i2stx_lrck_ext {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + };
> +
> + i2srx_bclk_ext: i2srx_bclk_ext {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + };
> +
> + i2srx_lrck_ext: i2srx_lrck_ext {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + };
> +
> + tdm_ext: tdm_ext {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + };
> +
> + mclk_ext: mclk_ext {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + };
> +
> + soc {
> + compatible = "simple-bus";
> + interrupt-parent = <&plic>;
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> +
> + clint: clint@2000000 {

Node names should be generic.
https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation

> + compatible = "starfive,jh7110-clint", "sifive,clint0";
> + reg = <0x0 0x2000000 0x0 0x10000>;
> + interrupts-extended = <&cpu0_intc 3>, <&cpu0_intc 7>,
> + <&cpu1_intc 3>, <&cpu1_intc 7>,
> + <&cpu2_intc 3>, <&cpu2_intc 7>,
> + <&cpu3_intc 3>, <&cpu3_intc 7>,
> + <&cpu4_intc 3>, <&cpu4_intc 7>;
> + };
> +
> + plic: plic@c000000 {

Node names should be generic, so interrupt-controller
https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation

> + compatible = "starfive,jh7110-plic", "sifive,plic-1.0.0";
> + reg = <0x0 0xc000000 0x0 0x4000000>;
> + interrupts-extended = <&cpu0_intc 11>,
> + <&cpu1_intc 11>, <&cpu1_intc 9>,
> + <&cpu2_intc 11>, <&cpu2_intc 9>,
> + <&cpu3_intc 11>, <&cpu3_intc 9>,
> + <&cpu4_intc 11>, <&cpu4_intc 9>;
> + interrupt-controller;
> + #interrupt-cells = <1>;
> + #address-cells = <0>;
> + riscv,ndev = <136>;
> + };
> +
> + ccache: cache-controller@2010000 {
> + compatible = "starfive,jh7110-ccache", "sifive,ccache0", "cache";
> + reg = <0x0 0x2010000 0x0 0x4000>;
> + interrupts = <1>, <3>, <4>, <2>;
> + cache-block-size = <64>;
> + cache-level = <2>;
> + cache-sets = <2048>;
> + cache-size = <2097152>;
> + cache-unified;
> + };
> +
> + uart0: serial@10000000 {
> + compatible = "snps,dw-apb-uart";
> + reg = <0x0 0x10000000 0x0 0x10000>;
> + clocks = <&syscrg JH7110_SYSCLK_UART0_CORE>,
> + <&syscrg JH7110_SYSCLK_UART0_APB>;
> + clock-names = "baudclk", "apb_pclk";
> + resets = <&syscrg JH7110_SYSRST_UART0_APB>;
> + interrupts = <32>;
> + reg-io-width = <4>;
> + reg-shift = <2>;
> + status = "disabled";
> + };
> +

Best regards,
Krzysztof