Re: [PATCH 0/6] RkVDEC HEVC driver
From: Robin Murphy
Date: Fri Jul 15 2022 - 07:05:12 EST
On 2022-07-13 17:24, Sebastian Fricke wrote:
Implement the HEVC codec variation for the RkVDEC driver. Currently only
the RK3399 is supported, but it is possible to enable the RK3288 as it
also supports this codec.
Based on top of the media tree @ef7fcbbb9eabbe86d2287484bf366dd1821cc6b8
and the HEVC uABI MR by Benjamin Gaignard.
(https://patchwork.linuxtv.org/project/linux-media/list/?series=8360)
Tested with the GStreamer V4L2 HEVC plugin:
(https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1079)
Current Fluster score:
`Ran 131/147 tests successfully in 278.568 secs`
with
`python3 fluster.py run -d GStreamer-H.265-V4L2SL-Gst1.0 -ts JCT-VC-HEVC_V1 -j1`
failed conformance tests:
- DBLK_D_VIXS_2 (Success on Hantro G2)
- DSLICE_A_HHI_5 (Success on Hantro G2)
- EXT_A_ericsson_4 (Success on Hantro G2)
- PICSIZE_A_Bossen_1 (Hardware limitation)
- PICSIZE_B_Bossen_1 (Hardware limitation)
- PICSIZE_C_Bossen_1 (Hardware limitation)
- PICSIZE_D_Bossen_1 (Hardware limitation)
- PPS_A_qualcomm_7 (Success on Hantro G2)
- SAODBLK_A_MainConcept_4 (Success on Hantro G2)
- SAODBLK_B_MainConcept_4 (Success on Hantro G2)
- SLIST_B_Sony_9 (Success on Hantro G2)
- SLIST_D_Sony_9 (Success on Hantro G2)
- TSUNEQBD_A_MAIN10_Technicolor_2 (Success on Hantro G2)
- VPSSPSPPS_A_MainConcept_1 (Success on Hantro G2)
- WPP_D_ericsson_MAIN10_2 (Fail on Hantro G2)
- WPP_D_ericsson_MAIN_2 (Fail on Hantro G2)
Not tested with FFMpeg so far.
Known issues:
- Unable to reliably decode multiple videos concurrently
- The SAODBLK_* tests timeout if the timeout time in fluster is lower than 120
- Currently the uv_virstride is calculated in a manner that is hardcoded
for the two available formats NV12 and NV15. (@config_registers)
Notable design decisions:
- I opted for a bitfield to represent the PPS memory blob as it is the
perfect tool for that job. It describes the memory layout with any
additional required documentation, is easy to read and a native language
tool for that job
Can I point out how terrible an idea this is? The C language gives
virtually zero guarantee about how bitfields are actually represented in
memory. Platform ABIs (e.g. [1]) might nail things down a bit more, but
different platforms are free to make completely different choices so
portability still goes out the window. Even for a single platform,
different compilers (or at worst even different version of one compiler)
can still make incompatible choices e.g. WRT alignment of packed
members. Even if you narrow the scope as far as a specific version of
AArch64 GCC, I think this is still totally broken for big-endian.
The fact that you've had to use nonsensical types to trick a compiler
into meeting your expectations should already be a clue to how fragile
this is in general.
- The RPS memory blob is created using a bitmap implementation, which
uses a common Kernel API to avoid reinventing the wheel and to keep the
code clean.
Similarly, Linux bitmaps are designed for use as, well, bitmaps. Abusing
them as a data interchange format for bit-aligned numerical values is
far from "clean" semantically. And I'm pretty sure it's also broken for
big-endian.
This kind of stuff may be standard practice in embedded development
where you're targeting a specific MCU with a specific toolchain, but I
don't believe it's suitable for upstream Linux. It would take pretty
much the same number of lines to use GENMASK definitions and bitfield.h
helpers to pack values into words which can then be written to memory in
a guaranteed format and endianness (certainly for the PPS; for the RPS
it may well end up a bit longer, but would be self-documenting and
certainly more readable than those loops). It mostly just means that for
any field which crosses a word boundary you'll end up with 2 definitions
and 2 assignments, which is hardly a problem (and in some ways more
honest about what's actually going on).
Thanks,
Robin.
[1]
https://github.com/ARM-software/abi-aa/blob/main/aapcs64/aapcs64.rst#bit-fields
- I deliberatly opted against the macro solution used in H264, which
declares Macros in mid function and declares the fields of the memory
blob as macros as well. And I would be glad to refactor the H264 code if
desired by the maintainer to use common Kernel APIs and native language
elements.
- The giant static array of cabac values is moved to a separate c file,
I did so because a separate .h file would be incorrect as it doesn't
expose anything of any value for any other file than the rkvdec-hevc.c
file. Other options were:
- Calculating the values instead of storing the results (doesn't seem
to be worth it)
- Supply them via firmware (Adding firmware makes the whole software
way more complicated and the usage of the driver less obvious)
Ignored Checkpatch warnings (as it fits to the current style of the file):
```
WARNING: line length of 162 exceeds 100 columns
#115: FILE: drivers/media/v4l2-core/v4l2-common.c:265:
+ { .format = V4L2_PIX_FMT_NV15, .pixel_enc = V4L2_PIXEL_ENC_YUV, .mem_planes = 1, .comp_planes = 2, .bpp = { 5, 5, 0, 0 }, .hdiv = 2, .vdiv = 2,
ERROR: trailing statements should be on next line
#128: FILE: drivers/media/v4l2-core/v4l2-ioctl.c:1305:
+ case V4L2_PIX_FMT_NV15: descr = "10-bit Y/CbCr 4:2:0 (Packed)"; break;
```
v4l2-compliance test:
```
Total for rkvdec device /dev/video3: 46, Succeeded: 46, Failed: 0, Warnings: 0
```
kselftest module run for the bitmap changes:
```
$ sudo insmod /usr/lib/modules/5.19.0-rc3-finalseries/kernel/lib/test_bitmap.ko
[ 71.751716] test_bitmap: parselist: 14: input is '0-2047:128/256' OK, Time: 1750
[ 71.751787] test_bitmap: bitmap_print_to_pagebuf: input is '0-32767
[ 71.751787] ', Time: 6708
[ 71.760373] test_bitmap: set_value: 6/6 tests correct
```
Jonas Karlman (2):
media: v4l2: Add NV15 pixel format
media: v4l2-common: Add helpers to calculate bytesperline and
sizeimage
Sebastian Fricke (4):
bitops: bitmap helper to set variable length values
staging: media: rkvdec: Add valid pixel format check
staging: media: rkvdec: Enable S_CTRL IOCTL
staging: media: rkvdec: Add HEVC backend
.../media/v4l/pixfmt-yuv-planar.rst | 53 +
drivers/media/v4l2-core/v4l2-common.c | 79 +-
drivers/media/v4l2-core/v4l2-ioctl.c | 1 +
drivers/staging/media/rkvdec/Makefile | 2 +-
drivers/staging/media/rkvdec/TODO | 22 +-
.../staging/media/rkvdec/rkvdec-hevc-data.c | 1844 +++++++++++++++++
drivers/staging/media/rkvdec/rkvdec-hevc.c | 859 ++++++++
drivers/staging/media/rkvdec/rkvdec-regs.h | 1 +
drivers/staging/media/rkvdec/rkvdec.c | 182 +-
drivers/staging/media/rkvdec/rkvdec.h | 3 +
include/linux/bitmap.h | 39 +
include/uapi/linux/videodev2.h | 1 +
lib/test_bitmap.c | 47 +
13 files changed, 3066 insertions(+), 67 deletions(-)
create mode 100644 drivers/staging/media/rkvdec/rkvdec-hevc-data.c
create mode 100644 drivers/staging/media/rkvdec/rkvdec-hevc.c