[PATCH] USB: serial: option: adding support for OPPO R11 diag port

[sdlyyxy]

From: Yan Xinyu <sdlyyxy@xxxxxxxxxxx>

This patch adds support for OPPO R11 USB diag serial port to option
driver. This phone uses Qualcomm Snapdragon 660 SoC.

usb-devices output:
T:  Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 10 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=22d9 ProdID=276c Rev=04.04
S:  Manufacturer=OPPO
S:  Product=SDM660-MTP _SN:09C6BCA7
S:  SerialNumber=beb2c403
C:  #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=500mA
I:  If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
I:  If#=0x1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs

Signed-off-by: Yan Xinyu <sdlyyxy@xxxxxxxxxxx>
---
 drivers/usb/serial/option.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index de59fa919540..cf65cb84c3ca 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -573,6 +573,10 @@ static void option_instat_callback(struct urb *urb);
 #define WETELECOM_PRODUCT_6802			0x6802
 #define WETELECOM_PRODUCT_WMD300		0x6803
 
+/* OPPO products */
+#define OPPO_VENDOR_ID				0x22d9
+#define OPPO_PRODUCT_R11			0x276c
+
 
 /* Device flags */
 
@@ -2155,6 +2159,7 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1404, 0xff) },			/* GosunCn GM500 RNDIS */
 	{ USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1405, 0xff) },			/* GosunCn GM500 MBIM */
 	{ USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1406, 0xff) },			/* GosunCn GM500 ECM/NCM */
+	{ USB_DEVICE_AND_INTERFACE_INFO(OPPO_VENDOR_ID, OPPO_PRODUCT_R11, 0xff, 0xff, 0x30) },
 	{ } /* Terminating entry */
 };
 MODULE_DEVICE_TABLE(usb, option_ids);
-- 
2.25.1