Re: [PATCH 4/5] firmware: qcom: scm: Add wait-queue helper functions

[Guru Das Srinagesh]

On Jul 01 2022 16:29, Rajendra Nayak wrote:
> 
> On 6/28/2022 1:14 AM, Guru Das Srinagesh wrote:
> >When the firmware (FW) supports multiple requests per VM, and the VM also
> >supports it via the `enable-multi-call` device tree flag, the floodgates
> >are thrown open for them to all reach the firmware at the same time.
> >
> >Since the firmware currently being used has limited resources, it guards
> >them with a resource lock and puts requests on a wait-queue internally
> >and signals to HLOS that it is doing so. It does this by returning two
> >new return values in addition to success or error: SCM_WAITQ_SLEEP and
> >SCM_WAITQ_WAKE.
> >
> >   1) SCM_WAITQ_SLEEP:
> >
> >   	When an SCM call receives this return value instead of success
> >   	or error, FW has placed this call on a wait-queue and
> >   	has signalled HLOS to put it to non-interruptible sleep. (The
> >	mechanism to wake it back up will be described in detail in the
> >	next patch for the sake of simplicity.)
> >
> >	Along with this return value, FW also passes to HLOS `wq_ctx` -
> >	a unique number (UID) identifying the wait-queue that it has put
> >	the call on, internally. This is to help HLOS with its own
> >	bookkeeping to wake this sleeping call later.
> >
> >	Additionally, FW also passes to HLOS `smc_call_ctx` - a UID
> >	identifying the SCM call thus being put to sleep. This is also
> >	for HLOS' bookkeeping to wake this call up later.
> >
> >	These two additional values are passed via the a1 and a2
> >	registers.
> >
> >	N.B.: The "ctx" in the above UID names = "context".
> >
> >   2) SCM_WAITQ_WAKE:
> >
> >   	When an SCM call receives this return value instead of success
> >   	or error, FW wishes to signal HLOS to wake up a (different)
> >   	previously sleeping call.
> 
> What happens to this SCM call itself (The one which gets an SCM_WAITQ_WAKE returned
> instead of a success or failure)?
> is it processed? how does the firmware in that case return a success or error?

Hopefully, with the clarificatory note posted in response to your query on the
other patch, this is clear. To answer your question:

Let's refer to the SCM call that received an SCM_WAITQ_WAKE as the parent call.
The parent call's success or failure depends on the result of the wq_wake_ack()
call defined below.

> 
...

> >   3) wq_wake_ack(smc_call_ctx):
> >
> >   	Arguments:	smc_call_ctx
> >
> >   	HLOS needs to issue this in response to receiving an
> >   	SCM_WAITQ_WAKE, passing to FW the same smc_call_ctx that FW
> >   	passed to HLOS via the SMC_WAITQ_WAKE call.

...

> >+
> >  static int qcom_scm_probe(struct platform_device *pdev)
> >  {
> >  	struct qcom_scm *scm;
> >  	unsigned long clks;
> >-	int ret;
> >+	int irq, ret;
> >  	scm = devm_kzalloc(&pdev->dev, sizeof(*scm), GFP_KERNEL);
> >  	if (!scm)
> >@@ -1333,12 +1432,28 @@ static int qcom_scm_probe(struct platform_device *pdev)
> >  	if (ret)
> >  		return ret;
> >+	platform_set_drvdata(pdev, scm);
> >+
> >  	__scm = scm;
> >  	__scm->dev = &pdev->dev;
> >+	spin_lock_init(&__scm->waitq.idr_lock);
> >+	idr_init(&__scm->waitq.idr);
> >  	qcom_scm_allow_multicall = of_property_read_bool(__scm->dev->of_node,
> >  							"allow-multi-call");
> >+	INIT_WORK(&__scm->waitq.scm_irq_work, scm_irq_work);
> >+
> >+	irq = platform_get_irq(pdev, 0);
> >+	if (irq) {
> >+		ret = devm_request_threaded_irq(__scm->dev, irq, NULL,
> >+			qcom_scm_irq_handler, IRQF_ONESHOT, "qcom-scm", __scm);
> >+		if (ret < 0) {
> >+			pr_err("Failed to request qcom-scm irq: %d\n", ret);
> 
> idr_destroy()?

Yes, will add in next patchset.