Re: [PATCH v2 4/5] dt-bindings: iio: adc: stmpe: Remove node name requirement

[Jonathan Cameron]

On Tue, 12 Jul 2022 18:33:44 +0200
Francesco Dolcini <francesco.dolcini@xxxxxxxxxxx> wrote:

> STMPE driver does not require a specific node name anymore, only the
> compatible is checked, update binding according to this.
> 
> Signed-off-by: Francesco Dolcini <francesco.dolcini@xxxxxxxxxxx>
I'm assuming this will go through mfd (or at least some tree that isn't
IIO :)  Shout if I should pick this up in the IIO tree.

Acked-by: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>

> ---
>  Documentation/devicetree/bindings/iio/adc/st,stmpe-adc.yaml | 3 +--
>  1 file changed, 1 insertion(+), 2 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/iio/adc/st,stmpe-adc.yaml b/Documentation/devicetree/bindings/iio/adc/st,stmpe-adc.yaml
> index 9049c699152f..333744a2159c 100644
> --- a/Documentation/devicetree/bindings/iio/adc/st,stmpe-adc.yaml
> +++ b/Documentation/devicetree/bindings/iio/adc/st,stmpe-adc.yaml
> @@ -13,8 +13,7 @@ description:
>    This ADC forms part of an ST microelectronics STMPE multifunction device .
>    The ADC is shared with the STMPE touchscreen. As a result some ADC related
>    settings are specified in the parent node.
> -  The node name myst be stmpe_adc and should be a child node of the stmpe node
> -  to which it belongs.
> +  The node should be a child node of the stmpe node to which it belongs.
>  
>  properties:
>    compatible: