[PATCH 5.10 29/55] arm64: dts: imx8mp-evk: correct the uart2 pinctl value

[Greg Kroah-Hartman]

From: Sherry Sun <sherry.sun@xxxxxxx>

[ Upstream commit 2d4fb72b681205eed4553d8802632bd3270be3ba ]

According to the IOMUXC_SW_PAD_CTL_PAD_UART2_RXD/TXD register define in
imx8mp RM, bit0 and bit3 are reserved, and the uart2 rx/tx pin should
enable the pull up, so need to set bit8 to 1. The original pinctl value
0x49 is incorrect and needs to be changed to 0x140, same as uart1 and
uart3.

Fixes: 9e847693c6f3 ("arm64: dts: freescale: Add i.MX8MP EVK board support")
Reviewed-by: Haibo Chen <haibo.chen@xxxxxxx>
Signed-off-by: Sherry Sun <sherry.sun@xxxxxxx>
Signed-off-by: Peng Fan <peng.fan@xxxxxxx>
Reviewed-by: Rasmus Villemoes <rasmus.villemoes@xxxxxxxxx>
Signed-off-by: Shawn Guo <shawnguo@xxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
 arch/arm64/boot/dts/freescale/imx8mp-evk.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
index 64f0455e14f8..5011adb5ff1f 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
@@ -167,8 +167,8 @@
 
 	pinctrl_uart2: uart2grp {
 		fsl,pins = <
-			MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX	0x49
-			MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX	0x49
+			MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX	0x140
+			MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX	0x140
 		>;
 	};
 
-- 
2.35.1