[PATCH v2 11/16] arm64: dts: mediatek: asurada: Add I2C touchscreen

From: Nícolas F. R. A. Prado
Date: Thu May 05 2022 - 15:47:08 EST


All machines of the Asurada platform have a touchscreen at address 0x10
in the I2C0 bus, but the devices vary: Spherion has the Elan eKTH3500
touchscreen, while Hayato has a generic HID-over-i2c touchscreen.

Add common support for the touchscreens on the platform and the
specifics in each board file.

Signed-off-by: Nícolas F. R. A. Prado <nfraprado@xxxxxxxxxxxxx>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
---

(no changes since v1)

.../dts/mediatek/mt8192-asurada-hayato-r1.dts | 7 ++++++
.../mediatek/mt8192-asurada-spherion-r0.dts | 4 +++
.../boot/dts/mediatek/mt8192-asurada.dtsi | 25 +++++++++++++++++++
3 files changed, 36 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt8192-asurada-hayato-r1.dts b/arch/arm64/boot/dts/mediatek/mt8192-asurada-hayato-r1.dts
index 00c76709a055..b62c747e9e54 100644
--- a/arch/arm64/boot/dts/mediatek/mt8192-asurada-hayato-r1.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8192-asurada-hayato-r1.dts
@@ -9,3 +9,10 @@ / {
model = "Google Hayato rev1";
compatible = "google,hayato-rev1", "google,hayato", "mediatek,mt8192";
};
+
+&touchscreen {
+ compatible = "hid-over-i2c";
+ post-power-on-delay-ms = <10>;
+ hid-descr-addr = <0x0001>;
+ vdd-supply = <&pp3300_u>;
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8192-asurada-spherion-r0.dts b/arch/arm64/boot/dts/mediatek/mt8192-asurada-spherion-r0.dts
index d384d584bbcf..35d9c5294fe0 100644
--- a/arch/arm64/boot/dts/mediatek/mt8192-asurada-spherion-r0.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8192-asurada-spherion-r0.dts
@@ -11,3 +11,7 @@ / {
"google,spherion-rev1", "google,spherion-rev0",
"google,spherion", "mediatek,mt8192";
};
+
+&touchscreen {
+ compatible = "elan,ekth3500";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi b/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi
index a15e84d86449..c852cb0e8b63 100644
--- a/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi
@@ -92,6 +92,13 @@ &i2c0 {
clock-frequency = <400000>;
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins>;
+
+ touchscreen: touchscreen@10 {
+ reg = <0x10>;
+ interrupts-extended = <&pio 21 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&touchscreen_pins>;
+ };
};

&i2c1 {
@@ -458,6 +465,24 @@ pins-int-n {
mediatek,pull-up-adv = <3>;
};
};
+
+ touchscreen_pins: touchscreen-default-pins {
+ pins-irq {
+ pinmux = <PINMUX_GPIO21__FUNC_GPIO21>;
+ input-enable;
+ bias-pull-up;
+ };
+
+ pins-reset {
+ pinmux = <PINMUX_GPIO137__FUNC_GPIO137>;
+ output-high;
+ };
+
+ pins-report-sw {
+ pinmux = <PINMUX_GPIO138__FUNC_GPIO138>;
+ output-low;
+ };
+ };
};

&spi1 {
--
2.36.0