[PATCH V11 3/9] dt-bindings: mfd: pm8008: Add regulators for pm8008

From: Satya Priya
Date: Thu May 05 2022 - 05:27:14 EST


Add regulators and their parent supplies along with example.

Signed-off-by: Satya Priya <quic_c_skakit@xxxxxxxxxxx>
---
Changes in V11:
- Add ldos directly under pm8008@8 node, remove the intermediate "regulators"
node.

Changes in V10:
- Regulators are added as a part of pm8008@8 device. Change bindings doc
accordingly.

Changes in V9:
- Remove description for reg and drop unused phandle from example.

Changes in V8:
- This is split from pm8008.yaml binding.

.../devicetree/bindings/mfd/qcom,pm8008.yaml | 50 ++++++++++++++++++++++
1 file changed, 50 insertions(+)

diff --git a/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml b/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml
index a41618e..231aaf0 100644
--- a/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml
+++ b/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml
@@ -47,6 +47,21 @@ properties:
reset-gpios:
maxItems: 1

+ vdd_l1_l2-supply:
+ description: Input supply phandle of ldo1 and ldo2 regulators.
+
+ vdd_l3_l4-supply:
+ description: Input supply phandle of ldo3 and ldo4 regulators.
+
+ vdd_l5-supply:
+ description: Input supply phandle of ldo5 regulator.
+
+ vdd_l6-supply:
+ description: Input supply phandle of ldo6 regulator.
+
+ vdd_l7-supply:
+ description: Input supply phandle of ldo7 regulator.
+
patternProperties:
"^gpio@[0],[0-9a-f]+$":
type: object
@@ -88,6 +103,27 @@ patternProperties:

additionalProperties: false

+ "^ldo[1-7]@[1],[0-9a-f]+$":
+ type: object
+
+ $ref: "/schemas/regulator/regulator.yaml#"
+
+ description: PM8008 regulator peripherals of PM8008 regulator device.
+
+ properties:
+ compatible:
+ const: qcom,pm8008-regulator
+
+ reg:
+ description: Peripheral offset and address of the ldo regulator.
+ maxItems: 1
+
+ required:
+ - compatible
+ - reg
+
+ unevaluatedProperties: false
+
required:
- compatible
- reg
@@ -120,6 +156,12 @@ examples:

reset-gpios = <&pm8350c_gpios 4 GPIO_ACTIVE_LOW>;

+ vdd_l1_l2-supply = <&vreg_s8b_1p2>;
+ vdd_l3_l4-supply = <&vreg_s1b_1p8>;
+ vdd_l5-supply = <&vreg_bob>;
+ vdd_l6-supply = <&vreg_bob>;
+ vdd_l7-supply = <&vreg_bob>;
+
pm8008_gpios: gpio@0,c000 {
compatible = "qcom,pm8008-gpio", "qcom,spmi-gpio";
reg = <0x0 0xc000>;
@@ -129,6 +171,14 @@ examples:
interrupt-controller;
#interrupt-cells = <2>;
};
+
+ ldo1@1,4000 {
+ compatible = "qcom,pm8008-regulator";
+ reg = <0x1 0x4000>;
+ regulator-name = "pm8008_ldo1";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <1300000>;
+ };
};
};

--
2.7.4