Re: [PATCH v3 1/9] iio: accel: bma400: Fix the scale min and max macro values

[Andy Shevchenko]

On Mon, Apr 11, 2022 at 11:31 PM Jagath Jog J <jagathjog1996@xxxxxxxxx> wrote:
>
> Changing the scale macro values to match the bma400 sensitivity
> for 1 LSB of all the available ranges.

Shouldn't this carry a Fixes tag?

> Signed-off-by: Jagath Jog J <jagathjog1996@xxxxxxxxx>
> ---
>  drivers/iio/accel/bma400.h | 23 +++++++++++++++++++++--
>  1 file changed, 21 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/iio/accel/bma400.h b/drivers/iio/accel/bma400.h
> index c4c8d74155c2..5d6a1976503f 100644
> --- a/drivers/iio/accel/bma400.h
> +++ b/drivers/iio/accel/bma400.h
> @@ -83,8 +83,27 @@
>  #define BMA400_ACC_ODR_MIN_WHOLE_HZ 25
>  #define BMA400_ACC_ODR_MIN_HZ       12
>
> -#define BMA400_SCALE_MIN            38357
> -#define BMA400_SCALE_MAX            306864
> +/*
> + * BMA400_SCALE_MIN macro value represents m/s^2 for 1 LSB before
> + * converting to micro values for +-2g range.
> + *
> + * For +-2g - 1 LSB = 0.976562 milli g = 0.009576 m/s^2
> + * For +-4g - 1 LSB = 1.953125 milli g = 0.019153 m/s^2
> + * For +-16g - 1 LSB = 7.8125 milli g = 0.076614 m/s^2
> + *
> + * The raw value which is used to select the different ranges is determined
> + * by the first bit set position from the scale value, so BMA400_SCALE_MIN
> + * should be odd.
> + *
> + * Scale values for +-2g, +-4g, +-8g and +-16g is populated into bma400_scales

are populated

> + * array by left shifting BMA400_SCALE_MIN.
> + * eg:

e.g.:

> + * To select +-2g = 9577 << 0 = raw value to write is 0.
> + * To select +-8g = 9577 << 2 = raw value to write is 2.
> + * To select +-16g = 9577 << 3 = raw value to write is 3.
> + */
> +#define BMA400_SCALE_MIN            9577
> +#define BMA400_SCALE_MAX            76617
>
>  #define BMA400_NUM_REGULATORS       2
>  #define BMA400_VDD_REGULATOR        0


-- 
With Best Regards,
Andy Shevchenko