Re: [PATCH v3 3/9] iio: accel: bma400: conversion to device-managed function

From: Andy Shevchenko
Date: Tue Apr 12 2022 - 06:19:30 EST

Next message: Andy Shevchenko: "Re: [PATCH v3 1/9] iio: accel: bma400: Fix the scale min and max macro values"
Previous message: Devarsh Thakkar: "Re: [PATCH] drm/tidss: Soft Reset DISPC on startup"
In reply to: Jagath Jog J: "[PATCH v3 3/9] iio: accel: bma400: conversion to device-managed function"
Next in thread: Jagath Jog J: "[PATCH v3 1/9] iio: accel: bma400: Fix the scale min and max macro values"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On Mon, Apr 11, 2022 at 11:31 PM Jagath Jog J <jagathjog1996@xxxxxxxxx> wrote:
>
> This is a conversion to device-managed by using devm_iio_device_register

devm_iio_device_register()

> inside probe function. Previously the bma400 was not put into power down
> mode in some error paths in probe where it now is, but that should cause
> no harm.
>
> The dev_set_drvdata() call, bma400_remove() function and hooks in the I2C
> and SPI driver struct is removed as devm_iio_device_register function is

devm_iio_device_register()

> used to automatically unregister on driver detach.

LGTM,
Reviewed-by: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>

> Signed-off-by: Jagath Jog J <jagathjog1996@xxxxxxxxx>
> ---
> drivers/iio/accel/bma400.h | 2 -
> drivers/iio/accel/bma400_core.c | 77 ++++++++++++++++-----------------
> drivers/iio/accel/bma400_i2c.c | 8 ----
> drivers/iio/accel/bma400_spi.c | 6 ---
> 4 files changed, 38 insertions(+), 55 deletions(-)
>
> diff --git a/drivers/iio/accel/bma400.h b/drivers/iio/accel/bma400.h
> index 5d6a1976503f..8dbf85eeb005 100644
> --- a/drivers/iio/accel/bma400.h
> +++ b/drivers/iio/accel/bma400.h
> @@ -113,6 +113,4 @@ extern const struct regmap_config bma400_regmap_config;
>
> int bma400_probe(struct device *dev, struct regmap *regmap, const char *name);
>
> -void bma400_remove(struct device *dev);
> -
> #endif
> diff --git a/drivers/iio/accel/bma400_core.c b/drivers/iio/accel/bma400_core.c
> index 25ad1f7339bc..07674d89d978 100644
> --- a/drivers/iio/accel/bma400_core.c
> +++ b/drivers/iio/accel/bma400_core.c
> @@ -560,6 +560,26 @@ static void bma400_init_tables(void)
> }
> }
>
> +static void bma400_regulators_disable(void *data_ptr)
> +{
> + struct bma400_data *data = data_ptr;
> +
> + regulator_bulk_disable(ARRAY_SIZE(data->regulators), data->regulators);
> +}
> +
> +static void bma400_power_disable(void *data_ptr)
> +{
> + struct bma400_data *data = data_ptr;
> + int ret;
> +
> + mutex_lock(&data->mutex);
> + ret = bma400_set_power_mode(data, POWER_MODE_SLEEP);
> + mutex_unlock(&data->mutex);
> + if (ret)
> + dev_warn(data->dev, "Failed to put device into sleep mode (%pe)\n",
> + ERR_PTR(ret));
> +}
> +
> static int bma400_init(struct bma400_data *data)
> {
> unsigned int val;
> @@ -569,13 +589,12 @@ static int bma400_init(struct bma400_data *data)
> ret = regmap_read(data->regmap, BMA400_CHIP_ID_REG, &val);
> if (ret) {
> dev_err(data->dev, "Failed to read chip id register\n");
> - goto out;
> + return ret;
> }
>
> if (val != BMA400_ID_REG_VAL) {
> dev_err(data->dev, "Chip ID mismatch\n");
> - ret = -ENODEV;
> - goto out;
> + return -ENODEV;
> }
>
> data->regulators[BMA400_VDD_REGULATOR].supply = "vdd";
> @@ -589,27 +608,31 @@ static int bma400_init(struct bma400_data *data)
> "Failed to get regulators: %d\n",
> ret);
>
> - goto out;
> + return ret;
> }
> ret = regulator_bulk_enable(ARRAY_SIZE(data->regulators),
> data->regulators);
> if (ret) {
> dev_err(data->dev, "Failed to enable regulators: %d\n",
> ret);
> - goto out;
> + return ret;
> }
>
> + ret = devm_add_action_or_reset(data->dev, bma400_regulators_disable, data);
> + if (ret)
> + return ret;
> +
> ret = bma400_get_power_mode(data);
> if (ret) {
> dev_err(data->dev, "Failed to get the initial power-mode\n");
> - goto err_reg_disable;
> + return ret;
> }
>
> if (data->power_mode != POWER_MODE_NORMAL) {
> ret = bma400_set_power_mode(data, POWER_MODE_NORMAL);
> if (ret) {
> dev_err(data->dev, "Failed to wake up the device\n");
> - goto err_reg_disable;
> + return ret;
> }
> /*
> * TODO: The datasheet waits 1500us here in the example, but
> @@ -618,19 +641,23 @@ static int bma400_init(struct bma400_data *data)
> usleep_range(1500, 2000);
> }
>
> + ret = devm_add_action_or_reset(data->dev, bma400_power_disable, data);
> + if (ret)
> + return ret;
> +
> bma400_init_tables();
>
> ret = bma400_get_accel_output_data_rate(data);
> if (ret)
> - goto err_reg_disable;
> + return ret;
>
> ret = bma400_get_accel_oversampling_ratio(data);
> if (ret)
> - goto err_reg_disable;
> + return ret;
>
> ret = bma400_get_accel_scale(data);
> if (ret)
> - goto err_reg_disable;
> + return ret;
>
> /*
> * Once the interrupt engine is supported we might use the
> @@ -639,12 +666,6 @@ static int bma400_init(struct bma400_data *data)
> * channel.
> */
> return regmap_write(data->regmap, BMA400_ACC_CONFIG2_REG, 0x00);
> -
> -err_reg_disable:
> - regulator_bulk_disable(ARRAY_SIZE(data->regulators),
> - data->regulators);
> -out:
> - return ret;
> }
>
> static int bma400_read_raw(struct iio_dev *indio_dev,
> @@ -822,32 +843,10 @@ int bma400_probe(struct device *dev, struct regmap *regmap, const char *name)
> indio_dev->num_channels = ARRAY_SIZE(bma400_channels);
> indio_dev->modes = INDIO_DIRECT_MODE;
>
> - dev_set_drvdata(dev, indio_dev);
> -
> - return iio_device_register(indio_dev);
> + return devm_iio_device_register(dev, indio_dev);
> }
> EXPORT_SYMBOL_NS(bma400_probe, IIO_BMA400);
>
> -void bma400_remove(struct device *dev)
> -{
> - struct iio_dev *indio_dev = dev_get_drvdata(dev);
> - struct bma400_data *data = iio_priv(indio_dev);
> - int ret;
> -
> - mutex_lock(&data->mutex);
> - ret = bma400_set_power_mode(data, POWER_MODE_SLEEP);
> - mutex_unlock(&data->mutex);
> -
> - if (ret)
> - dev_warn(dev, "Failed to put device into sleep mode (%pe)\n", ERR_PTR(ret));
> -
> - regulator_bulk_disable(ARRAY_SIZE(data->regulators),
> - data->regulators);
> -
> - iio_device_unregister(indio_dev);
> -}
> -EXPORT_SYMBOL_NS(bma400_remove, IIO_BMA400);
> -
> MODULE_AUTHOR("Dan Robertson <dan@xxxxxxxxxxxxxxx>");
> MODULE_DESCRIPTION("Bosch BMA400 triaxial acceleration sensor core");
> MODULE_LICENSE("GPL");
> diff --git a/drivers/iio/accel/bma400_i2c.c b/drivers/iio/accel/bma400_i2c.c
> index da104ffd3fe0..4f6e01a3b3a1 100644
> --- a/drivers/iio/accel/bma400_i2c.c
> +++ b/drivers/iio/accel/bma400_i2c.c
> @@ -27,13 +27,6 @@ static int bma400_i2c_probe(struct i2c_client *client,
> return bma400_probe(&client->dev, regmap, id->name);
> }
>
> -static int bma400_i2c_remove(struct i2c_client *client)
> -{
> - bma400_remove(&client->dev);
> -
> - return 0;
> -}
> -
> static const struct i2c_device_id bma400_i2c_ids[] = {
> { "bma400", 0 },
> { }
> @@ -52,7 +45,6 @@ static struct i2c_driver bma400_i2c_driver = {
> .of_match_table = bma400_of_i2c_match,
> },
> .probe = bma400_i2c_probe,
> - .remove = bma400_i2c_remove,
> .id_table = bma400_i2c_ids,
> };
>
> diff --git a/drivers/iio/accel/bma400_spi.c b/drivers/iio/accel/bma400_spi.c
> index 51f23bdc0ea5..28e240400a3f 100644
> --- a/drivers/iio/accel/bma400_spi.c
> +++ b/drivers/iio/accel/bma400_spi.c
> @@ -87,11 +87,6 @@ static int bma400_spi_probe(struct spi_device *spi)
> return bma400_probe(&spi->dev, regmap, id->name);
> }
>
> -static void bma400_spi_remove(struct spi_device *spi)
> -{
> - bma400_remove(&spi->dev);
> -}
> -
> static const struct spi_device_id bma400_spi_ids[] = {
> { "bma400", 0 },
> { }
> @@ -110,7 +105,6 @@ static struct spi_driver bma400_spi_driver = {
> .of_match_table = bma400_of_spi_match,
> },
> .probe = bma400_spi_probe,
> - .remove = bma400_spi_remove,
> .id_table = bma400_spi_ids,
> };
>
> --
> 2.17.1
>

--
With Best Regards,
Andy Shevchenko

Next message: Andy Shevchenko: "Re: [PATCH v3 1/9] iio: accel: bma400: Fix the scale min and max macro values"
Previous message: Devarsh Thakkar: "Re: [PATCH] drm/tidss: Soft Reset DISPC on startup"
In reply to: Jagath Jog J: "[PATCH v3 3/9] iio: accel: bma400: conversion to device-managed function"
Next in thread: Jagath Jog J: "[PATCH v3 1/9] iio: accel: bma400: Fix the scale min and max macro values"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]