Re: [PATCH v6 2/2] usb: typec: anx7411: Add Analogix PD ANX7411 support
From: Xin Ji
Date: Wed Mar 02 2022 - 21:48:14 EST
On Wed, Mar 02, 2022 at 02:03:18PM +0200, Heikki Krogerus wrote:
> Hi,
>
> This does not apply on top of Greg's latest usb-next branch. You need
> to rebase this. There are also a few more nitpicks below.
Hi, I didn't found tcpci.h in include/linux/usb/
I download the latest usb-next branch from Greg's usb.git repo, but
cannot found tcpci.h in "include/linux/usb", please check my command log
below:
$git clone git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git
$git checkout -b usb-next origin/usb-next
$git log --pretty=oneline --abbrev-commit
ca9400ef7f67 (HEAD -> usb-next, origin/usb-testing, origin/usb-next) Merge 5.17-rc6 into usb-next
7e57714cd0ad (tag: v5.17-rc6, origin/usb-linus, origin/main) Linux 5.17-rc6
52a025546731 Merge tag 'irq-urgent-2022-02-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
$ls include/linux/usb/tcpci.h
ls: cannot access 'include/linux/usb/tcpci.h': No such file or directory
URL: https://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git/tree/include/linux/usb?h=usb-next
If I didn't correctly clone the repository, please let me known, thanks
for you support.
Thanks,
Xin
>
> On Wed, Feb 23, 2022 at 06:23:52PM +0800, Xin Ji wrote:
> > diff --git a/drivers/usb/typec/anx7411.h b/drivers/usb/typec/anx7411.h
> > new file mode 100644
> > index 000000000000..cc0b7a570438
> > --- /dev/null
> > +++ b/drivers/usb/typec/anx7411.h
> > @@ -0,0 +1,273 @@
> > +/* SPDX-License-Identifier: GPL-2.0-only */
> > +
> > +/*
> > + * Copyright(c) 2022, Analogix Semiconductor. All rights reserved.
> > + *
> > + */
> > +
> > +#ifndef __ANX7411_H__
> > +#define __ANX7411_H__
> > +
> > +#define TCPC_ADDRESS1 0x58
> > +#define TCPC_ADDRESS2 0x56
> > +#define TCPC_ADDRESS3 0x54
> > +#define TCPC_ADDRESS4 0x52
> > +#define SPI_ADDRESS1 0x7e
> > +#define SPI_ADDRESS2 0x6e
> > +#define SPI_ADDRESS3 0x64
> > +#define SPI_ADDRESS4 0x62
> > +
> > +struct anx7411_i2c_select {
> > + u8 tcpc_address;
> > + u8 spi_address;
> > +};
> > +
> > +#define VENDOR_ID 0x1F29
> > +#define PRODUCT_ID 0x7411
>
> Please make that VENDOR_ID_<vendor name>, and the same with the
> product ID.
>
> > +/* TCPC register define */
> > +
> > +#define TCPC_ROLE_CONTROL 0x1A
> > +
> > +#define TCPC_COMMAND 0x23
> > +#define TCPC_CMD_I2C_IDLE 0xFF
> > +#define TCPC_CMD_LOOK4CONN 0x99
> > +#define SINK_CTRL_EN 0x55
> > +#define SINK_CTRL_DIS 0x44
> > +
> > +#define ANALOG_CTRL_10 0xAA
>
> Those are TCPC commands and registers. I though I already asked that
> you move the register and command definitions from
> drivers/usb/typec/tcpm/tcpci.h to include/linux/usb/tcpci.h?
>
> You need to do that in a separate patch, but I really think it would
> be worth doing, even though there are only a few shared definitions
> here.
>
> > +#define STATUS_LEN 2
> > +#define ALERT_0 0xCB
> > +#define RECEIVED_MSG BIT(7)
> > +#define SOFTWARE_INT BIT(6)
> > +#define MSG_LEN 32
> > +#define HEADER_LEN 2
> > +#define MSG_HEADER 0x00
> > +#define MSG_TYPE 0x01
> > +#define MSG_RAWDATA 0x02
> > +#define MSG_LEN_MASK 0x1F
> > +
> > +#define ALERT_1 0xCC
> > +#define INTP_POW_ON BIT(7)
> > +#define INTP_POW_OFF BIT(6)
> > +
> > +#define VBUS_THRESHOLD_H 0xDD
> > +#define VBUS_THRESHOLD_L 0xDE
> > +
> > +#define FW_CTRL_0 0xF0
> > +#define UNSTRUCT_VDM_EN BIT(0)
> > +#define DELAY_200MS BIT(1)
> > +#define VSAFE0 0
> > +#define VSAFE1 BIT(2)
> > +#define VSAFE2 BIT(3)
> > +#define VSAFE3 (BIT(2) | BIT(3))
> > +#define FRS_EN BIT(7)
> > +
> > +#define FW_PARAM 0xF1
> > +#define DONGLE_IOP BIT(0)
> > +
> > +#define FW_CTRL_2 0xF7
> > +#define SINK_CTRL_DIS_FLAG BIT(5)
> > +
> > +/* SPI register define */
> > +#define OCM_CTRL_0 0x6E
> > +#define OCM_RESET BIT(6)
> > +
> > +#define MAX_VOLTAGE 0xAC
> > +#define MAX_POWER 0xAD
> > +#define MIN_POWER 0xAE
> > +
> > +#define REQUEST_VOLTAGE 0xAF
> > +#define VOLTAGE_UNIT 100 /* mV per unit */
> > +
> > +#define REQUEST_CURRENT 0xB1
> > +#define CURRENT_UNIT 50 /* mA per unit */
> > +
> > +#define CMD_SEND_BUF 0xC0
> > +#define CMD_RECV_BUF 0xE0
> > +
> > +#define REQ_VOL_20V_IN_100MV 0xC8
> > +#define REQ_CUR_2_25A_IN_50MA 0x2D
> > +#define REQ_CUR_3_25A_IN_50MA 0x41
> > +
> > +#define DEF_5V 5000
> > +#define DEF_1_5A 1500
> > +
> > +enum anx7411_typec_message_type {
> > + TYPE_SRC_CAP = 0x00,
> > + TYPE_SNK_CAP = 0x01,
> > + TYPE_SNK_IDENTITY = 0x02,
> > + TYPE_SVID = 0x03,
> > + TYPE_SET_SNK_DP_CAP = 0x08,
> > + TYPE_PSWAP_REQ = 0x10,
> > + TYPE_DSWAP_REQ = 0x11,
> > + TYPE_VDM = 0x14,
> > + TYPE_OBJ_REQ = 0x16,
> > + TYPE_DP_ALT_ENTER = 0x19,
> > + TYPE_DP_DISCOVER_MODES_INFO = 0x27,
> > + TYPE_GET_DP_CONFIG = 0x29,
> > + TYPE_DP_CONFIGURE = 0x2A,
> > + TYPE_GET_DP_DISCOVER_MODES_INFO = 0x2E,
> > + TYPE_GET_DP_ALT_ENTER = 0x2F,
> > +};
> > +
> > +#define REQUEST_CURRENT 0xB1
> > +#define REQUEST_VOLTAGE 0xAF
>
> Double definition - you already defined those two in this same file
> above.
>
> > +#define FW_CTRL_1 0xB2
> > +#define AUTO_PD_EN BIT(1)
> > +#define TRYSRC_EN BIT(2)
> > +#define TRYSNK_EN BIT(3)
> > +#define FORCE_SEND_RDO BIT(6)
> > +
> > +#define FW_VER 0xB4
> > +#define FW_SUBVER 0xB5
> > +
> > +#define INT_MASK 0xB6
> > +#define INT_STS 0xB7
> > +#define OCM_BOOT_UP BIT(0)
> > +#define OC_OV_EVENT BIT(1)
> > +#define VCONN_CHANGE BIT(2)
> > +#define VBUS_CHANGE BIT(3)
> > +#define CC_STATUS_CHANGE BIT(4)
> > +#define DATA_ROLE_CHANGE BIT(5)
> > +#define PR_CONSUMER_GOT_POWER BIT(6)
> > +#define HPD_STATUS_CHANGE BIT(7)
> > +
> > +#define SYSTEM_STSTUS 0xB8
> > +/* 0: SINK off; 1: SINK on */
> > +#define SINK_STATUS BIT(1)
> > +/* 0: VCONN off; 1: VCONN on*/
> > +#define VCONN_STATUS BIT(2)
> > +/* 0: vbus off; 1: vbus on*/
> > +#define VBUS_STATUS BIT(3)
> > +/* 1: host; 0:device*/
> > +#define DATA_ROLE BIT(5)
> > +/* 0: Chunking; 1: Unchunked*/
> > +#define SUPPORT_UNCHUNKING BIT(6)
> > +/* 0: HPD low; 1: HPD high*/
> > +#define HPD_STATUS BIT(7)
> > +
> > +#define DATA_DFP 1
> > +#define DATA_UFP 2
> > +#define POWER_SOURCE 1
> > +#define POWER_SINK 2
> > +
> > +#define CC_STATUS 0xB9
> > +#define CC1_RD BIT(0)
> > +#define CC2_RD BIT(4)
> > +#define CC1_RA BIT(1)
> > +#define CC2_RA BIT(5)
> > +#define CC1_RD BIT(0)
> > +#define CC1_RP(cc) (((cc) >> 2) & 0x03)
> > +#define CC2_RP(cc) (((cc) >> 6) & 0x03)
> > +
> > +#define PD_REV_INIT 0xBA
> > +
> > +#define PD_EXT_MSG_CTRL 0xBB
> > +#define SRC_CAP_EXT_REPLY BIT(0)
> > +#define MANUFACTURER_INFO_REPLY BIT(1)
> > +#define BATTERY_STS_REPLY BIT(2)
> > +#define BATTERY_CAP_REPLY BIT(3)
> > +#define ALERT_REPLY BIT(4)
> > +#define STATUS_REPLY BIT(5)
> > +#define PPS_STATUS_REPLY BIT(6)
> > +#define SNK_CAP_EXT_REPLY BIT(7)
> > +
> > +#define NO_CONNECT 0x00
> > +#define USB3_1_CONNECTED 0x01
> > +#define DP_ALT_4LANES 0x02
> > +#define USB3_1_DP_2LANES 0x03
> > +#define CC1_CONNECTED 0x01
> > +#define CC2_CONNECTED 0x02
> > +#define SELECT_PIN_ASSIGMENT_C 0x04
> > +#define SELECT_PIN_ASSIGMENT_D 0x08
> > +#define SELECT_PIN_ASSIGMENT_E 0x10
> > +#define SELECT_PIN_ASSIGMENT_U 0x00
> > +#define REDRIVER_ADDRESS 0x20
> > +#define REDRIVER_OFFSET 0x00
> > +
> > +#define DP_SVID 0xFF01
> > +#define VDM_ACK 0x40
> > +#define VDM_CMD_RES 0x00
> > +#define VDM_CMD_DIS_ID 0x01
> > +#define VDM_CMD_DIS_SVID 0x02
> > +#define VDM_CMD_DIS_MOD 0x03
> > +#define VDM_CMD_ENTER_MODE 0x04
> > +#define VDM_CMD_EXIT_MODE 0x05
> > +#define VDM_CMD_ATTENTION 0x06
> > +#define VDM_CMD_GET_STS 0x10
> > +#define VDM_CMD_AND_ACK_MASK 0x5F
> > +
> > +#define MAX_ALTMODE 2
> > +
> > +#define HAS_SOURCE_CAP BIT(0)
> > +#define HAS_SINK_CAP BIT(1)
> > +#define HAS_SINK_WATT BIT(2)
> > +
> > +enum anx7411_psy_state {
> > + /* copy from drivers/usb/typec/tcpm */
> > + ANX7411_PSY_OFFLINE = 0,
> > + ANX7411_PSY_FIXED_ONLINE,
> > +
> > + /* private */
> > + /* PD keep in, but disconnct power to bq25700,
> > + * this state can be active when higher capacity adapter plug in,
> > + * and change to ONLINE state when higher capacity adapter plug out
> > + */
> > + ANX7411_PSY_HANG = 0xff,
> > +};
> > +
> > +struct typec_params {
> > + int request_current; /* ma */
> > + int request_voltage; /* mv */
> > + int cc_connect;
> > + int cc_orientation_valid;
> > + int cc_status;
> > + int data_role;
> > + int power_role;
> > + int vconn_role;
> > + int dp_altmode_enter;
> > + int cust_altmode_enter;
> > + struct usb_role_switch *role_sw;
> > + struct typec_port *port;
> > + struct typec_partner *partner;
> > + struct typec_mux *typec_mux;
> > + struct typec_switch *typec_switch;
> > + struct typec_altmode *amode[MAX_ALTMODE];
> > + struct typec_altmode *port_amode[MAX_ALTMODE];
> > + struct typec_displayport_data data;
> > + int pin_assignment;
> > + struct typec_capability caps;
> > + u32 src_pdo[PDO_MAX_OBJECTS];
> > + u32 sink_pdo[PDO_MAX_OBJECTS];
> > + u8 caps_flags;
> > + u8 src_pdo_nr;
> > + u8 sink_pdo_nr;
> > + u8 sink_watt;
> > + u8 sink_voltage;
> > +};
> > +
> > +struct anx7411_data {
> > + int fw_version;
> > + int fw_subversion;
> > + struct i2c_client *tcpc_client;
> > + struct i2c_client *spi_client;
> > + struct gpio_desc *intp_gpiod;
> > + struct fwnode_handle *connector_fwnode;
> > + struct typec_params typec;
> > + int intp_irq;
> > + struct work_struct work;
> > + struct workqueue_struct *workqueue;
> > + /* Lock for interrupt work queue */
> > + struct mutex lock;
> > +
> > + enum anx7411_psy_state psy_online;
> > + enum power_supply_usb_type usb_type;
> > + struct power_supply *psy;
> > + struct power_supply_desc psy_desc;
> > + struct device *dev;
> > +};
> > +
> > +#endif /* __ANX7411_H__ */
>
> thanks,
>
> --
> heikki