Re: [PATCH] powerpc: dts: t1040rdb: fix ports names for Seville Ethernet switch

[Vladimir Oltean]

On Thu, Dec 30, 2021 at 01:43:28PM +0300, Maxim Kiselev wrote:
> Fix network interface names for the switch ports according to labels
> that are written on the front panel of the board. They start from ETH3
> and end at ETH10.
> 
> Fixes: e69eb0824d8c ("powerpc: dts: t1040rdb: add ports for Seville
> Ethernet switch")

A Fixes: tag should not wrap on multiple lines.

> Signed-off-by: Maxim Kiselev <bigunclemax@xxxxxxxxx>
> Reviewed-by: Maxim Kochetkov <fido_max@xxxxxxxx>
> ---

Sadly I'm not able to confirm or disprove this change right now, because
my T1040RDB has a bad DDR memory stick, it seems, so it just randomly hangs.
But I'm pretty sure the Ethernet ports were properly mapped out when I
tested them.

Do you have the T1040RDB or the T1040D4RDB? Because the front panel of
my T1040RDB looks like this:

 +---------------------------------------------------------------------+
 |                                                                     |
 |  +-------+-------+               +-------+-------+-------+-------+  |
 |  | UART0 |  ETH1 |               |  ETH4 |  ETH6 |  ETH8 | ETH10 |  |
 |  +-------+-------+-------+-------+-------+-------+-------+-------+  |
 |  | UART1 |  ETH0 |  ETH2 |  ETH3 |  ETH5 |  ETH7 |  ETH9 | ETH11 |  |
 +--+-------+-------+-------+-------+-------+-------+-------+-------+--+

>  arch/powerpc/boot/dts/fsl/t1040rdb.dts | 8 ++++----
>  1 file changed, 4 insertions(+), 4 deletions(-)
> 
> diff --git a/arch/powerpc/boot/dts/fsl/t1040rdb.dts b/arch/powerpc/boot/dts/fsl/t1040rdb.dts
> index af0c8a6f56138..b6733e7e65805 100644
> --- a/arch/powerpc/boot/dts/fsl/t1040rdb.dts
> +++ b/arch/powerpc/boot/dts/fsl/t1040rdb.dts
> @@ -119,7 +119,7 @@ &seville_port0 {
>  	managed = "in-band-status";
>  	phy-handle = <&phy_qsgmii_0>;
>  	phy-mode = "qsgmii";
> -	label = "ETH5";
> +	label = "ETH3";
>  	status = "okay";
>  };
>  
> @@ -135,7 +135,7 @@ &seville_port2 {
>  	managed = "in-band-status";
>  	phy-handle = <&phy_qsgmii_2>;
>  	phy-mode = "qsgmii";
> -	label = "ETH7";
> +	label = "ETH5";
>  	status = "okay";
>  };
>  
> @@ -151,7 +151,7 @@ &seville_port4 {
>  	managed = "in-band-status";
>  	phy-handle = <&phy_qsgmii_4>;
>  	phy-mode = "qsgmii";
> -	label = "ETH9";
> +	label = "ETH7";
>  	status = "okay";
>  };
>  
> @@ -167,7 +167,7 @@ &seville_port6 {
>  	managed = "in-band-status";
>  	phy-handle = <&phy_qsgmii_6>;
>  	phy-mode = "qsgmii";
> -	label = "ETH11";
> +	label = "ETH9";
>  	status = "okay";
>  };
>  
> -- 
> 2.32.0
>