[PATCH] powerpc: dts: t1040rdb: fix ports names for Seville Ethernet switch

[Maxim Kiselev]

Fix network interface names for the switch ports according to labels
that are written on the front panel of the board. They start from ETH3
and end at ETH10.

Fixes: e69eb0824d8c ("powerpc: dts: t1040rdb: add ports for Seville
Ethernet switch")
Signed-off-by: Maxim Kiselev <bigunclemax@xxxxxxxxx>
Reviewed-by: Maxim Kochetkov <fido_max@xxxxxxxx>
---
 arch/powerpc/boot/dts/fsl/t1040rdb.dts | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/powerpc/boot/dts/fsl/t1040rdb.dts b/arch/powerpc/boot/dts/fsl/t1040rdb.dts
index af0c8a6f56138..b6733e7e65805 100644
--- a/arch/powerpc/boot/dts/fsl/t1040rdb.dts
+++ b/arch/powerpc/boot/dts/fsl/t1040rdb.dts
@@ -119,7 +119,7 @@ &seville_port0 {
 	managed = "in-band-status";
 	phy-handle = <&phy_qsgmii_0>;
 	phy-mode = "qsgmii";
-	label = "ETH5";
+	label = "ETH3";
 	status = "okay";
 };
 
@@ -135,7 +135,7 @@ &seville_port2 {
 	managed = "in-band-status";
 	phy-handle = <&phy_qsgmii_2>;
 	phy-mode = "qsgmii";
-	label = "ETH7";
+	label = "ETH5";
 	status = "okay";
 };
 
@@ -151,7 +151,7 @@ &seville_port4 {
 	managed = "in-band-status";
 	phy-handle = <&phy_qsgmii_4>;
 	phy-mode = "qsgmii";
-	label = "ETH9";
+	label = "ETH7";
 	status = "okay";
 };
 
@@ -167,7 +167,7 @@ &seville_port6 {
 	managed = "in-band-status";
 	phy-handle = <&phy_qsgmii_6>;
 	phy-mode = "qsgmii";
-	label = "ETH11";
+	label = "ETH9";
 	status = "okay";
 };
 
-- 
2.32.0