Re: [RFC PATCH 2/6] clk: sifive: Use reset-simple in prci driver for PCIe driver

[Philipp Zabel]

On Tue, 2021-03-02 at 18:59 +0800, Greentime Hu wrote:
> We use reset-simple in this patch so that pcie driver can use
> devm_reset_control_get() to get this reset data structure and use
> reset_control_deassert() to deassert pcie_power_up_rst_n.
> 
> Signed-off-by: Greentime Hu <greentime.hu@xxxxxxxxxx>
> ---
>  drivers/clk/sifive/Kconfig       |  2 ++
>  drivers/clk/sifive/sifive-prci.c | 14 ++++++++++++++
>  drivers/clk/sifive/sifive-prci.h |  4 ++++
>  drivers/reset/Kconfig            |  3 ++-
>  4 files changed, 22 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/clk/sifive/Kconfig b/drivers/clk/sifive/Kconfig
> index 1c14eb20c066..9132c3c4aa86 100644
> --- a/drivers/clk/sifive/Kconfig
> +++ b/drivers/clk/sifive/Kconfig
> @@ -10,6 +10,8 @@ if CLK_SIFIVE
>  
>  config CLK_SIFIVE_PRCI
>  	bool "PRCI driver for SiFive SoCs"
> +	select RESET_CONTROLLER
> +	select RESET_SIMPLE
>  	select CLK_ANALOGBITS_WRPLL_CLN28HPC
>  	help
>  	  Supports the Power Reset Clock interface (PRCI) IP block found in
> diff --git a/drivers/clk/sifive/sifive-prci.c b/drivers/clk/sifive/sifive-prci.c
> index baf7313dac92..925affc6de55 100644
> --- a/drivers/clk/sifive/sifive-prci.c
> +++ b/drivers/clk/sifive/sifive-prci.c
> @@ -583,7 +583,21 @@ static int sifive_prci_probe(struct platform_device *pdev)
>  	if (IS_ERR(pd->va))
>  		return PTR_ERR(pd->va);
>  
> +	pd->reset.rcdev.owner = THIS_MODULE;
> +	pd->reset.rcdev.nr_resets = PRCI_RST_NR;
> +	pd->reset.rcdev.ops = &reset_simple_ops;
> +	pd->reset.rcdev.of_node = pdev->dev.of_node;
> +	pd->reset.active_low = true;
> +	pd->reset.membase = pd->va + PRCI_DEVICESRESETREG_OFFSET;
> +	spin_lock_init(&pd->reset.lock);
> +
> +	r = devm_reset_controller_register(&pdev->dev, &pd->reset.rcdev);
> +	if (r) {
> +		dev_err(dev, "could not register reset controller: %d\n", r);
> +		return r;
> +	}
>  	r = __prci_register_clocks(dev, pd, desc);
> +

Accidental whitespace?

Otherwise,

Reviewed-by: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>

regards
Philipp