Re: [PATCH 18/30] scsi: pm8001: pm8001_hwi: Fix some misnamed function descriptions

[Jinpu Wang]

On Wed, Mar 3, 2021 at 3:47 PM Lee Jones <lee.jones@xxxxxxxxxx> wrote:
>
> Fixes the following W=1 kernel build warning(s):
>
>  drivers/scsi/pm8001/pm8001_hwi.c:1183: warning: expecting prototype for pm8001_chip_interrupt_enable(). Prototype was for pm8001_chip_intx_interrupt_enable() instead
>  drivers/scsi/pm8001/pm8001_hwi.c:1257: warning: expecting prototype for pm8001_chip_intx_interrupt_disable(). Prototype was for pm8001_chip_interrupt_disable() instead
>  drivers/scsi/pm8001/pm8001_hwi.c:3235: warning: expecting prototype for asd_get_attached_sas_addr(). Prototype was for pm8001_get_attached_sas_addr() instead
>  drivers/scsi/pm8001/pm8001_hwi.c:3555: warning: expecting prototype for fw_flash_update_resp(). Prototype was for pm8001_mpi_fw_flash_update_resp() instead
>
> Cc: Jack Wang <jinpu.wang@xxxxxxxxxxxxxxx>
> Cc: "James E.J. Bottomley" <jejb@xxxxxxxxxxxxx>
> Cc: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
> Cc: linux-scsi@xxxxxxxxxxxxxxx
> Signed-off-by: Lee Jones <lee.jones@xxxxxxxxxx>
Acked-by: Jack Wang <jinpu.wang@xxxxxxxxxxxxxxx>
Thanks
> ---
>  drivers/scsi/pm8001/pm8001_hwi.c | 8 ++++----
>  1 file changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c
> index 49bf2f70a470e..6b600e33e9e8d 100644
> --- a/drivers/scsi/pm8001/pm8001_hwi.c
> +++ b/drivers/scsi/pm8001/pm8001_hwi.c
> @@ -1175,7 +1175,7 @@ void pm8001_chip_iounmap(struct pm8001_hba_info *pm8001_ha)
>
>  #ifndef PM8001_USE_MSIX
>  /**
> - * pm8001_chip_interrupt_enable - enable PM8001 chip interrupt
> + * pm8001_chip_intx_interrupt_enable - enable PM8001 chip interrupt
>   * @pm8001_ha: our hba card information
>   */
>  static void
> @@ -1248,7 +1248,7 @@ pm8001_chip_interrupt_enable(struct pm8001_hba_info *pm8001_ha, u8 vec)
>  }
>
>  /**
> - * pm8001_chip_intx_interrupt_disable- disable PM8001 chip interrupt
> + * pm8001_chip_interrupt_disable - disable PM8001 chip interrupt
>   * @pm8001_ha: our hba card information
>   * @vec: unused
>   */
> @@ -3219,7 +3219,7 @@ void pm8001_get_lrate_mode(struct pm8001_phy *phy, u8 link_rate)
>  }
>
>  /**
> - * asd_get_attached_sas_addr -- extract/generate attached SAS address
> + * pm8001_get_attached_sas_addr - extract/generate attached SAS address
>   * @phy: pointer to asd_phy
>   * @sas_addr: pointer to buffer where the SAS address is to be written
>   *
> @@ -3546,7 +3546,7 @@ int pm8001_mpi_dereg_resp(struct pm8001_hba_info *pm8001_ha, void *piomb)
>  }
>
>  /**
> - * fw_flash_update_resp - Response from FW for flash update command.
> + * pm8001_mpi_fw_flash_update_resp - Response from FW for flash update command.
>   * @pm8001_ha: our hba card information
>   * @piomb: IO message buffer
>   */
> --
> 2.27.0
>