[PATCH 18/30] scsi: pm8001: pm8001_hwi: Fix some misnamed function descriptions

[Lee Jones]

Fixes the following W=1 kernel build warning(s):

 drivers/scsi/pm8001/pm8001_hwi.c:1183: warning: expecting prototype for pm8001_chip_interrupt_enable(). Prototype was for pm8001_chip_intx_interrupt_enable() instead
 drivers/scsi/pm8001/pm8001_hwi.c:1257: warning: expecting prototype for pm8001_chip_intx_interrupt_disable(). Prototype was for pm8001_chip_interrupt_disable() instead
 drivers/scsi/pm8001/pm8001_hwi.c:3235: warning: expecting prototype for asd_get_attached_sas_addr(). Prototype was for pm8001_get_attached_sas_addr() instead
 drivers/scsi/pm8001/pm8001_hwi.c:3555: warning: expecting prototype for fw_flash_update_resp(). Prototype was for pm8001_mpi_fw_flash_update_resp() instead

Cc: Jack Wang <jinpu.wang@xxxxxxxxxxxxxxx>
Cc: "James E.J. Bottomley" <jejb@xxxxxxxxxxxxx>
Cc: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
Cc: linux-scsi@xxxxxxxxxxxxxxx
Signed-off-by: Lee Jones <lee.jones@xxxxxxxxxx>
---
 drivers/scsi/pm8001/pm8001_hwi.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c
index 49bf2f70a470e..6b600e33e9e8d 100644
--- a/drivers/scsi/pm8001/pm8001_hwi.c
+++ b/drivers/scsi/pm8001/pm8001_hwi.c
@@ -1175,7 +1175,7 @@ void pm8001_chip_iounmap(struct pm8001_hba_info *pm8001_ha)
 
 #ifndef PM8001_USE_MSIX
 /**
- * pm8001_chip_interrupt_enable - enable PM8001 chip interrupt
+ * pm8001_chip_intx_interrupt_enable - enable PM8001 chip interrupt
  * @pm8001_ha: our hba card information
  */
 static void
@@ -1248,7 +1248,7 @@ pm8001_chip_interrupt_enable(struct pm8001_hba_info *pm8001_ha, u8 vec)
 }
 
 /**
- * pm8001_chip_intx_interrupt_disable- disable PM8001 chip interrupt
+ * pm8001_chip_interrupt_disable - disable PM8001 chip interrupt
  * @pm8001_ha: our hba card information
  * @vec: unused
  */
@@ -3219,7 +3219,7 @@ void pm8001_get_lrate_mode(struct pm8001_phy *phy, u8 link_rate)
 }
 
 /**
- * asd_get_attached_sas_addr -- extract/generate attached SAS address
+ * pm8001_get_attached_sas_addr - extract/generate attached SAS address
  * @phy: pointer to asd_phy
  * @sas_addr: pointer to buffer where the SAS address is to be written
  *
@@ -3546,7 +3546,7 @@ int pm8001_mpi_dereg_resp(struct pm8001_hba_info *pm8001_ha, void *piomb)
 }
 
 /**
- * fw_flash_update_resp - Response from FW for flash update command.
+ * pm8001_mpi_fw_flash_update_resp - Response from FW for flash update command.
  * @pm8001_ha: our hba card information
  * @piomb: IO message buffer
  */
-- 
2.27.0