Re: [PATCH v7 1/2] dt-bindings: iio: accel: Add bmi088 accelerometer bindings

[Jonathan Cameron]

On Thu, 21 Jan 2021 16:56:58 +0100
Mike Looijmans <mike.looijmans@xxxxxxxx> wrote:

> This adds the device-tree bindings for the Bosch Sensortec BMI088 IMU,
> the accelerometer part.
> 
> Signed-off-by: Mike Looijmans <mike.looijmans@xxxxxxxx>
Just the issue the build bot found.  Otherwise looks good to me.

Jonathan

> 
> ---
> 
> Changes in v7:
> Add additionalProperties
> Change bmi088_accel to bmi088-accel
> Add interrupt-names and adjust description
> 
> Changes in v6:
> I't been almost a year since the last commit, sorry...
> Fixed the yaml errors
> Add interrupt, vdd and vddio properties
> 
> Changes in v5:
> submit together with driver code as patch series
> 
> Changes in v2:
> convert to yaml format
> 
>  .../bindings/iio/accel/bosch,bmi088.yaml      | 66 +++++++++++++++++++
>  1 file changed, 66 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/iio/accel/bosch,bmi088.yaml
> 
> diff --git a/Documentation/devicetree/bindings/iio/accel/bosch,bmi088.yaml b/Documentation/devicetree/bindings/iio/accel/bosch,bmi088.yaml
> new file mode 100644
> index 000000000000..db5dbaf80fa2
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/accel/bosch,bmi088.yaml
> @@ -0,0 +1,66 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/iio/accel/bosch,bmi088.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Bosch BMI088 IMU accelerometer part
> +
> +maintainers:
> +  - Mike Looijmans <mike.looijmans@xxxxxxxx>
> +
> +description: |
> +  Acceleration part of the IMU sensor with an SPI interface
> +  Specifications about the sensor can be found at:
> +    https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bmi088-ds001.pdf
> +
> +properties:
> +  compatible:
> +    enum:
> +      - bosch,bmi088-accel
> +
> +  reg:
> +    maxItems: 1
> +
> +  vdd-supply: true
> +
> +  vddio-supply: true
> +
> +  interrupts:
> +    minItems: 1
> +    maxItems: 2
> +    description: |
> +      Type should be either IRQ_TYPE_LEVEL_HIGH or IRQ_TYPE_LEVEL_LOW.
> +      Two configurable interrupt lines exist.
> +
> +  interrupt-names:
> +    description: Specify which interrupt line is in use.
> +    items:
> +      enum:
> +        - INT1
> +        - INT2
> +    minItems: 1
> +    maxItems: 2

As per Rob's build bot you need.

spi-max-frequency: true

If that's all that comes up and Rob is happy with this I can fix that up whilst
applying.  Please try to run the checks suggested in Rob's build bot message
before submitting binding patches though.


> +
> +required:
> +  - compatible
> +  - reg
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +    spi {
> +      #address-cells = <1>;
> +      #size-cells = <0>;
> +      bmi088-accel@1 {
> +        compatible = "bosch,bmi088-accel";
> +        reg = <1>;
> +        spi-max-frequency = <10000000>;
> +        interrupt-parent = <&gpio6>;
> +        interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
> +        interrupt-names = "INT2";
> +      };
> +    };
> +...