Re: [PATCH v7 1/2] dt-bindings: iio: accel: Add bmi088 accelerometer bindings

[Rob Herring]

On Thu, 21 Jan 2021 16:56:58 +0100, Mike Looijmans wrote:
> This adds the device-tree bindings for the Bosch Sensortec BMI088 IMU,
> the accelerometer part.
> 
> Signed-off-by: Mike Looijmans <mike.looijmans@xxxxxxxx>
> 
> ---
> 
> Changes in v7:
> Add additionalProperties
> Change bmi088_accel to bmi088-accel
> Add interrupt-names and adjust description
> 
> Changes in v6:
> I't been almost a year since the last commit, sorry...
> Fixed the yaml errors
> Add interrupt, vdd and vddio properties
> 
> Changes in v5:
> submit together with driver code as patch series
> 
> Changes in v2:
> convert to yaml format
> 
>  .../bindings/iio/accel/bosch,bmi088.yaml      | 66 +++++++++++++++++++
>  1 file changed, 66 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/iio/accel/bosch,bmi088.yaml
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/iio/accel/bosch,bmi088.example.dt.yaml: bmi088-accel@1: 'spi-max-frequency' does not match any of the regexes: 'pinctrl-[0-9]+'
	From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/iio/accel/bosch,bmi088.yaml

See https://patchwork.ozlabs.org/patch/1429940

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.