Re: [PATCH v4] usb/mtu3: power down device ip at setup

[Chunfeng Yun]

hi Hsin-Yi,

On Thu, 2018-11-29 at 11:16 +0800, Hsin-Yi, Wang wrote:
> Originally, when dr_mode is USB_DR_MODE_HOST, it didn't power down device ip,
> so host ip sleep will fail at ssusb_host_disable.
> 
> Power down device ip at ssusb_host_setup.
> 
> Signed-off-by: Hsin-Yi, Wang <hsinyi@xxxxxxxxxxxx>
> ---
> ChangeLog:
> V3->V4:
>   *update comment
> ---
>  drivers/usb/mtu3/mtu3_plat.c | 8 ++++++++
>  1 file changed, 8 insertions(+)
> 
> diff --git a/drivers/usb/mtu3/mtu3_plat.c b/drivers/usb/mtu3/mtu3_plat.c
> index 46551f6d16fd..e086630e41a9 100644
> --- a/drivers/usb/mtu3/mtu3_plat.c
> +++ b/drivers/usb/mtu3/mtu3_plat.c
> @@ -200,6 +200,14 @@ static void ssusb_ip_sw_reset(struct ssusb_mtk *ssusb)
>  	mtu3_setbits(ssusb->ippc_base, U3D_SSUSB_IP_PW_CTRL0, SSUSB_IP_SW_RST);
>  	udelay(1);
>  	mtu3_clrbits(ssusb->ippc_base, U3D_SSUSB_IP_PW_CTRL0, SSUSB_IP_SW_RST);
> +
> +	/*
> +	 * device ip may be powered on in firmware/BROM stage before entering
> +	 * kernel stage;
> +	 * power down device ip, otherwise ip-sleep will fail when working as
> +	 * host only mode
> +	 */
> +	mtu3_setbits(ssusb->ippc_base, U3D_SSUSB_IP_PW_CTRL2, SSUSB_IP_DEV_PDN);
>  }
>  
>  /* ignore the error if the clock does not exist */

Acked-by: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>

Thanks a lot